ミッツ社のプリント基板加工機による加工の様子

これは私が個人で所有しているミッツ(MITS)社のプリント基板加工機による加工の様子を撮影した動画です。かなり古い機種なのですが、ご覧のようにプリント基板の試作で機動性を発揮してくれています。
http://www.neo-tech-lab.co.uk

source

PCB Board Fab in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., founded on Apr 1, 2014 upon succeeding the complete Circuit Board business from AICA Kogyo Co., Ltd., provides the full solution for the Circuit Board products like pattern-designing, simulation for obtaining good high-speed signal quality and EMC, and Circuit Board production of different quantities. Our professional consultation service is made available for the analysis of electrical characteristics at an early stage of Circuit Board Development.

Our corporation name “RITA”(chosen from the suggestions by our personnel) represents the “Real Integrated Technology and Advisory” to represent our promise to the technological perfection and the high level of services to our consumers.

In Dec 2016, all of the shares of RITA Electronics, Ltd. were properly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We expect a great many synergy effects from the vertical integration of Taishodo’s Electronic Manufacturing Service and our Circuit Board products.

Due to the support from all our customers and partners, we performed our first 3 business years in success. We continue to run after much higher level of technologies to fulfill our consumers’ criteria.

We are grateful for your continuing support and trust!

Get in Touch with Us

Telphone: 052-930-6151
Telefax: 052-930-6157
Mailbox: rp.deri@ritael.co.jp

Dependent on https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s PCB Board manufacturing facilities in China and japan supply a great number of support from starting prototype to production – all production sites aim for high product mix in volume production across a range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Enterprise Story

Yamamoto Mfg. Ltd. started in the year 1945 in the watchcase-metallurgy business and successfully built this business in Japan, Korea, and China.

In the year 1968, Yamamoto parlayed their metallurgical and plating practical experience into PCB Boards with an preliminary plant in Tokorozawa Japan – Yamamoto’s initial foray into PCB Boards was motivated by a massive contract in 1968 with IBM Yasu Japan and development and research projects with some top notch Japanese OEM’s. An added Advanced Technology manufacturing unit was began in Honjo Japan in 1985 and additionally Expanded in the year 2001. Yamamoto also has new PCB Board manufacturing area in the Guangdong Province of China which opened in 2008.

In Japan by way of 2 Advanced Technology industrial facilities and 2 Drill-Plating Support facilities with over 700K sq. ft. of manufacturing room as well as our factory in China mainland, Yamamoto is well positioned to back up all PCB Board technology levels all over the globe without ever sacrificing level of quality.

Write to us
sales@yusa.com

Dependent on http://www.yusa.com/

Thick Copper Electronic Board Manufacturing And PCBA Companies 2016

PART 1: http://www.youtube.com/watch?v=VXE_dh38HjU
PART 3: http://www.youtube.com/watch?v=2zGisPMNstI
A follow up to Dave’s popular PCB Design For Manufacture (DFM) tutorial video.
This time he updates his uCurrent PCB for production, including panelisation layout and component reel selection. Lots of the same ground is covered as in part 1, but with a specific real project example.

Source

Thick Copper Electronic Board Manufacturing And PCBA Companies 2016

contract-pcb-china-01

YingStar

From http://www.yingstar-pcba.com/choose.asp

YingStar Electronics Introduction

To adequately offer our buyers professional services with quickest time and most competitive rate, YingStar Electronics has its own PWB manufacturing plant (set up in 2002, nestled in MeiZhou City, GuangDong ), PWB assemblage manufacturing unit (built up in 2006, nestled in Bao’ An district, Shenzhen City) and PWB design teams. YingStar can supply one stop services ranging from PWB design, prototyping to mass PWB assemblage production. Of course, if you’ve placed volume order to YingStar and your design is new and need to be enhanced or changed in the realistic application, our professional specialists can provide you the potent support without recharging any extra money.

Cut-throat competitive Price

YingStar often stock in excess of 5000 common components from leading vendors and work with the internationally renowned electronic parts distributors just like DigiKey, Mouser, Element14, Arrow, Avnet, Maxim as well as Future Electronics to warrant our logistics system is smooth and satisfy both the emergency requirements and basic needs with shortest lead-time and very competitive cost.

Quick Delivery

We can do the on time delivery and decrease clients’ wait time, for the reason that:
1, We usually preserve in excess of 5000 frequently used components;
2, Our company has essentially the most experienced procurement team and cooperate with justly famed electronic parts suppliers;
3, We have our own PWB and PCB assemblage manufacturing plant;
4, We have our own design team who is going to guide clients to clear up the complex technical problems.

Quality Promise

We guarantee that all the goods we produced are 100% certified and have at the very least one year warranty time period, but the precondition is that all the components of the products are supplied by us (this include PWB, electronic parts and assemblage task). And for those products only partially services supplied by us, we are only accountable for the liability of the services offered by us.

Confidentiality

We handle all your information as very secret and make every effort to look after your intellectual property (IP) rights.

The confidentiality of your info is covered with the subsequent strategies and processes.

Approved entry only: To external users, only proved users can access information that he/she is allowed to uncover. To inside users, access of information is on a need-to-know basis. Your information are compartmentalized and linked with number IDs. One example is, our production technicians who can view design files are only authorized to see project and customer IDs; our shipping will not present billing details; and our accounting will not view design files.

Security exam: We perform everyday security examination to upkeep our security criteria.

Deletion of information: We can delete any specified information once asked for.

Get in contact with Us

Shenzhen YingStar Electronics Co., Ltd
Tel: 0086-755-27808878
Fax: 0086-755-27316461
Office Address: 302, Jin Li Hua Mansion, Gong Yuan Road, Bao’An 31 District, Shenzhen City, China ZIP Code:518101
Production line Address:
6F, #2 Building, Zhuguang East Road, Chuangxin Technology Park, Xinli Town, Nanshan District, Shenzhen, China

contract-pcb-china-01

Shenzhen MOKO Tech Ltd

We Present a Broad Variety of Printed Circuit Board Choices to Suit All of Your PCB Needs.

Moko Tech Ltd founded in the year 2001, located within Shenzhen, China. is an expert in PCB board manufacturing and PCB board assembly, located in Shenzhen, China. We’re specialized in fabricating single-sided , double-sided and multilayer PCB boards, up to 18 layers. Furthermore, we could make available parts purchase and complete PCB board assembly service.

With around a decade in the industry of PCB board prototype and manufacturing, we are focused on matching the objectives of our buyers from many industries in terms of level of quality, transport, cost-effectiveness and almost every other request(s). As being among the most professional PCB board manufacturers in China, we are confident to be your most excellent partners .

In China, we are respected as the quality provider for a large number of firms all around the world. We can provide a variety of services including PCB board manufacturing and PCB board assembly for from sample orders through batch orders.

With regards to PCB board assy, utilizing 8 high-speed SMT assy lines brought from Japan Yamaha and Sony, we make our best to suit our clients’ requires.

One-stop Service: Further than Printed Circuit Board Manufacture

Our raised experience in circuit boards is not merely restricted to PCB board manufacturing but gets to all associated services consisting of PCB board design / layout and PCB board assembly. Our experienced design gurus can enable you to gain economical excellence in your multi-layer design or we can design your circuit over completely from scratch: from a fundamental double-sided board to complicated rigid-flex PCB applications. In 2012, our branch – Shenzhen Eastwin Trading Ltd created as a way to extend worldwide Market.

We have our 25,000 sq. ft. cutting-edge production line to provide the quality brilliance you require…

We now have gathered the ISO9001:2000, ISO14001, UL as well as ROHS certifications. Right away our PCB board capacity arrives at A thousand square meters per day, and as for PCB board assembly can get to 100 mil units per month.

We extremely reckon that our excellent service and expertise will fully meet up with your demands. Credibility and innovation are the factors that determine our accomplishments. We’re the most useful alternative to meet your requirements.

To get more detailed products and services, more incentives, or costless samples make sure to

Contact Us

Shenzhen MOKO Tech Limited
Telphone: 86-75523573370
Fax: 86-75523573370-808
E-mail: alex@szeastwin.com
Address : 4F,Buidling #2,Guanghui Technology Park,Minqing Road, Longhua Town, Shenzhen City, China
Postal Code: 518109

Determined by http://www.mokotechnology.com/about/

contract-pcb-china-01

Topscom Tech Co.,Limited

In accordance with : http://www.topscom.com.cn/info-132-en.html

Corporation Profile

Two Decades Of Electronic devices Turnkey OEM / ODM, Electronic Contract Manufacturing(otherwise known as ECM) and Printed Circuit Board Assembly Services — China Topscom

Topscom is a primary Electronics Manufacturing Services (sometimes known as EMS) supplier focused on delivering advanced design and production services to auto, industrial, health-related, prospects, telecom, and tech firms. With financial year 2013 earnings of 360 Mil USD, Topscom facilitates consumers design and layout, produce, shipping, and electronics that provides buyers with entire design, engineering, and fab resources which are vertically bundled with parts to enhance their operations by cutting down their costs and minimizing the time period to markets.

Topscom brings an wide collection of fabricating, engineering and machining services, such as in-house highly accurate SMT mount, plastic material injection molding, high volume metal stamping, die-casting and tailor made fabrication.

Full-furnished Sectors

Our several business units are aligned to offer you an extensive range of fabrication, engineering and machining services:
Our SMT abilities include 0201, leadless and flip-chip techniques.
Our plastic injection molding division is aligned with state-of-the-art devices in white room and ice water air conditioning system. A specific production line is furthermore created to remove and slice the material grain.
Our metal stamping team is equipped with CNC process center, silk devices and also drilling devices from Japan and Taiwan.
In our mold tooling department, we choose Pro-Engineer expert software program for helpful design support. By using EROWA grips, we can easily control the accuracy and precision under 3 ums.
To keep qc strategy excellent, we regularly analyse our test flow graphs. In addition, we maintain procurement workplaces in Tokyo, Japan, Singapore and also Hong Kong manipulated by our central components warehouse in Shenzhen.

Our production line is located within Shenzhen, China with a total region of 200,Thousand sqms and above 4,000 workers. We highly put our trust in the significance of our workers and want to maintain a qualified mindset and organization culture that fosters imagination and offers job satisfaction.

The management focuses on continuous training, open interaction, group interaction and contribution in decision-making process.

With substantial knowledge of cooperating with high-technology businesses and varied consumer base in wide product selection, we are highly convinced to deliver fantastic services, high flexibility, great value mfg solutions and prompt delivery for our buyers.

Our best rated clients list all over the globe: Rda (Australia) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Netherlands), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (British), Cisco (United States of America).

Connect with US

Tel: +86-755-22211988 (50 Line)
Fax:+86-755-83768890
Electronic mail: frankwu@topscom.com.cn
Cellphone :+86 13502814037
Address: #18, Tannan Road,Tanjia Industrial Zone,Gongming Street,Shenzhen City, Guangdong Province China.

Hong Kong Office:

Location : 1st Building Weigan Center JiuLong Hong Kong
Electronic mail: ivy.ko@topscom.com.cn( Ms.Ivy Ko)

contract-pcb-china-01

ALLPCB Platform

ALLPCB is the 1st world-wide internet based platform with PCB prototyping and low-volume PCB manufacturing services.
After 2013, ALLPCB has long been making an attempt to deliver the most low-cost PCB manufacturing service and supply global SMEs with complete PCB design process and technical support from “Prototype to Production”. With the intention to reach a fast response to customers’ requires, now we have built a efficient service and support system. Our delivery performance, quality control, client support and rapid response to complaints play a role in our top position in PCB industry.

ALLPCB gains advantage from distinctive assets in a good many areas:

1. PCB Makers

At least A hundred Chinese PCB manufacturers have become a member of ALLPCB manufacturer system, offering up 1 – 30 layers boards for PCB prototyping and low-volume PCB manufacturing. They consist of multilayer board, high frequency board, metal core board, HDI board and rigid-flex board. The quickest lead time might be within just One day. Each of the PCB manufacturer members have passed on our strict on-spot examination by certified auditors concerning the environment, devices, materials, certifications and management. All the review information are available and transparent via the web, ensuring the manufacture capability reliability of every PCB manufacturer.

2. Elements

ALLPCB cooperates with in excess of 30 well known parts distributors, delivering more than 5 million electronic parts handy. A minimum of 95% orders placed can be certain to be shipped the same day.

3. PCA(Printed Circuit Assembly)

ALLPCB works in concert with more than 10 PCBA manufacturers with the power of prototype and low-volume manufacture within just 2 – 3 days. And the pass rate of finished products extends to 99.9%.
ALLPCB possesses a potent team with 100+ client support persons and designers . We offer you 24/7 service for world-wide buyers using email, phone and actual time chat.
“Manufactured in China, Favorite among the entire world” is the chase of ALLPCB today. ALLPCB definitely will attempt to realize the improvement from”Produced in China” to”Produced in the globe”, making the expansion of worldwide SMEs much easier and bringing the persons far better living by making usage of science!

Contact Us

Addr.: 12th Floor,West #2 Building, XinTianDi Business Center, #71-8 ShiXiang Road,XiaCheng District, Hangzhou City, China
E-mail : service@ALLPCB.com

Origin : http://www.allpcb.com/about_us.html

6oz PWB Manufacturing And PCBA Suppliers 2016

Did you know that arduino PCBs are made start to finish in a single factory in the tiny town of strambino, italy? this video shuttles you through all the stages of their creation: from punching the foundation holes to etching to screen-printing to rinsing to milling and finally testing.

Etching : one of the most fascinating steps of PCB production is etching, and the locally produced machines at arduino’s production plant system elettronica are mesmerizing to watch at work. in etching, man works deftly alongside machine to drive sheets of arduinos through a series of acid washes across six holding tanks.

Pick and Place : sheets of arduinos get outfitted with their electronic infrastructure by a pick-and-place machine that automatically and precisely places SMD components like resistors and capacitors.

Ready to ship : man and machine work together at breakneck speed to get microcontrollers ready to ship out to the world. filmed on the packaging floor at smartprojects in the arduino factory complex.

see more details at designboom.com/technology/arduino-factory-tour/

Video by designboom at https://vimeo.com/designboom

Source

6oz PWB Manufacturing And PCBA Suppliers 2016

contract-pcb-china-01

YingStar Technology

From http://www.yingstar-pcba.com/choose.asp

YingStar Outline

To comprehensively offer our customers professional services with shortest time and bottom charge, YingStar Electronics does have its PCB manufacturing area (started in 2002, located in MeiZhou City, GuangDong province), PCB assembly factory (started in 2006, centered at Bao’ An district, Shenzhen City) and PCB design teams. YingStar provides turn-key services covering everything from PCB design, prototyping to batch PCB assembly production. Of course , if you have placed volume order to YingStar and your design is fresh and must be evolved or changed in the real application, our professional technicians can offer you the great support without billing any other dollars.

Reasonable Price

YingStar consistently hold over 5000 common elements from high quality makers and work with the internationally famous electronic components suppliers for example DigiKey, Mouser, Element14, Arrow, Avnet, Maxim as well as Future Electronics to make sure our supply chain system is smooth and support both the emergency requirements and common demands with fastest lead-time and cut-throat cost.

Timely Delivery

We can do the prompt delivery and lower consumers’ wait time, mainly because:
1, We regularly store close to 5000 well-liked elements;
2, Now we have quite possibly the most professional procurement team and cooperate with justly famed electronic components distributors;
3, We possess our own PCB and PCB assembly manufacturing area;
4, We possess our own design department who is going to aid consumers to take care of the sophisticated technical problems.

Quality Promise

We make certain that all the products we produced are 100% certified and have at the least 1 year warranty time period, but the requirement is that all the elements of the products are provided by us (including PCB, electronic components and assembly work). And for those boards only partially services supplied by us, we’re only responsible for the liability of the services offered by us.

Confidentiality

We manage all of your info as very confidential and do our best to look after your intellectual property (IP) rights.

The confidentiality of your info is covered with the below means and processes.

Approved access only: To outer users, only authenticated users can access info that he/she is permitted to see. To inner users, access of info is on a need-to-know foundation. Your info are compartmentalized and linked to number IDs. To illustrate, our production specialists who are able to observe design files can only see project and customer IDs; our delivery will not show billing details; and our accounting can’t check design files.

Security audit: We do frequent security review to maintain our security requirements.

Deletion of info: We will eliminate any specific info when asked for.

Connect with Us

Shenzhen YingStar Electronics Co., Ltd
Phone: 0086-755-27808878
Facsimile: 0086-755-27316461
Office Address: 302, Jin Li Hua Mansion, Gong Yuan Road, Bao’An 31 District, Shenzhen City, China Post Code:518101
Manufacturing unit Address:
6F, 2nd Building, Zhuguang East Road, Chuangxin Technology Park, Xinli Town, Nanshan District, Shenzhen, China

contract-pcb-china-01

China MOKO Technology Ltd

We Provide a Wide Variety of Electronic Board Options to Match All of Your PCB Requirements.

Moko Technology Ltd established in the year 2001, headquartered in Shenzhen, China. has specialized in circuit board fabrication plus circuit board assy, based in Shenzhen, Guangdong, China. We’re specializing in manufacturing single-sided , double-sided and multi-layer PCB boards, to a maximum of 18 layers. Also, we can make available components sourcing and entire circuit board assy service.

With beyond a decade in the industry of circuit board prototype and fabricating, we’re devoted to suiting the requirements of our customers from many industries in terms of level of quality, shipping, cost and every other request(s). Being on the list of most seasoned circuit board manufacturers in China, we are confident to become your most advantageous partners .

In Shenzhen, we’re honored as the top-notch provider for loads of companies all over the world. We deliver a variety of services including circuit board fabrication and circuit board assy for from sample orders to batch orders.

With regards to circuit board assy, utilizing 8 high-speed SMT assy lines brought in from Japan Yamaha and Sony, we do our best to meet our consumers’ requires.

One-stop Service: Above Electronic Board Fab

Our enhanced expertise in electronic boards is not only restricted to circuit board fabrication but also includes all associated services such as circuit board design / layout and circuit board assy. Our highly skilled design pros can help you to accomplish economical perfection in your multi-layer design or we can easily design your circuit from scratch: from a simple double-sided board to complicated rigid-flex PCB applications. In the year 2012, our subcompany – Shenzhen Eastwin Trading Ltd founded with a purpose to stretch offshore Market.

We have our 25,000 square ft. state-of-the-art production line to supply the quality superiority you want…

We now have received the ISO9001:2000, ISO14001, UL and also ROHS certificates. So now our circuit board ability reaches to A thousand sqm. each day, and for circuit board assy can come to 100 million pieces per month.

We greatly reckon that our good quality service and experience will fully deal with your expectations. Trustworthiness and innovation are the drives that bring about our triumph. We’re the most effective option for your business.

For extra products and services, more credits, or free of charge trials you ought to

Contact with Us

China MOKO Technology Limited
Telphone: 86-75523573370
Facsimile: 86-75523573370-808
Mailbox: jenny@mokotechnology.com.cn
Address : 4F,Buidling #2,Guanghui Technology Park,Minqing Road, Longhua Town, Shenzhen City, China
Zipcode: 518109

Depending on http://www.mokotechnology.com/about/

contract-pcb-china-01

Topscom Technology Co.,Limited

Based upon : http://www.topscom.com.cn/info-132-en.html

Business Summary

Twenty Years Of Electronic devices Entire OEM / ODM, Electronic Contract Manufacturing(referred to as ECM) and PCB Board Assy Services — Shenzhen Topscom

Topscom is a major Electronics Manufacturing Services (often known as EMS) provider committed to providing cutting edge design and production services to auto, industrial, healthcare, prospects, phone system, and modern technology businesses. With monetary year 2013 revenues of 360 Mil $, Topscom assists buyers design, build, delivery, and electronic devices that presents consumers with overall design, engineering, and fab resources which are vertically integrated with components to strengthen their operations by reducing their charges and minimizing the time to markets.

Topscom gives you an huge array of manufacturing, engineering and machining services, such as in-house highly precise SMT mount, plastic material injection casting, high volume metal stamping, die-casting and customizable manufacturing.

Full-furnished Divisions

Our different sections are aligned to deliver an vast range of manufacturing, engineering and machining services:
Our SMT functions cover 0201, zero-Lead and flip-chip processes.
Our plastic injection molding division is aligned with cutting-edge devices in white room and cold water cooling system. A specialized production line is as well built to take away and slice the material grain.
Our metal stamping division comes with CNC process center, silk equipment as well as drilling equipment received from Japan and Taiwan.
In our mold tooling dept, we utilize Pro-Engineer pro program for useful design assistance. Working with EROWA grips, we are able to maintain the accuracy under 3 ums.
To keep qc strategy efficacious, we frequently check our test flow tables. We also hold purchasing office in Tokyo, Singapore and Hong Kong managed by our centralized supplies stockroom in Shenzhen.

Our facility is in Shenzhen, China with a sum place of 200,Thousand square meters and about 4,000 workers. We definitely have confidence on the importance of our workers and desire to retain a skilled mind-set and corporation tradition that helps bring about creativeness and provides job fulfillment.

The supervision stresses continuing training, open interaction, group interaction and contribution in decision-making process.

With vast expertise in participating with high-tech corporations and diversified customer base in wide product selection, we’re quite sure to provide remarkable services, high flexibility, cost effective fab solutions and on time delivery for our purchasers.

Our biggest clients list in the world: Rda (Australia) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Netherlands), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (England), Cisco (America).

Reach US

Tel: +86-755-22211988
Facsimile:+86-755-83768890
Electronic mail: frankwu@topscom.com.cn
Mobile phone :+86 13502814037
Address: #18, Tannan Road,Tanjia Industrial Area,Gongming Street,Guangming New District,Shenzhen City, China.

HK Office:

Address : 1st Building Weigan Center JiuLong HK
Electronic mail: ivy.ko@topscom.com.cn( Ms.Ivy Ko)

contract-pcb-china-01

ALLPCB Network

ALLPCB is the 1st overseas web based platform with PCB prototyping and small-volume PCB fabricating services.
From 2013, ALLPCB has been aiming to provide the most cost-effective PCB fabricating service and present multinational SMEs with complete PCB design process and technical support from “Prototype to Production”. To be able to realize a quick answer to customers’ needs, we now have launched a highly potent service and support system. Our delivery performance, quality control, client service and speedy reply to problems give rise to our top notch position in PCB world.

ALLPCB has unique assets in some factors:

1. PCB Producers

In excess of 100 Chinese PCB makers have registered with ALLPCB producer network, allowing 1 To 30 layers boards for PCB prototyping and small-volume PCB fabricating. They feature multilayer board, high frequency board, metal core board, HDI board and rigid-flex board. The speediest leading time might be within A day. All the PCB manufacturer members have passed on our stringent on-spot review by professional auditors about the environment, devices, materials, certificates and management. All of the evaluation documents are wide open and transparent online, making sure that the manufacture capability validity of every single PCB producer.

2. Parts

ALLPCB partners with more than 30 recognized components suppliers, offering about 5 million electronic components available. At the least 95% orders placed can be certain to be shipped on the same day.

3. PCB Assembly

ALLPCB works in concert with about 10 PCBA makers with the ability of prototype and small-volume manufacture in 2 To 3 days. Plus the pass rate of finished products achieves 99.9%.
ALLPCB features a highly-effective team with 100+ consumer support staff and technicians . We feature 24/7 service for overseas consumers using e-mail message, phone and actual time chat.
“Produced in China, Used by the globe” is the goal of ALLPCB currently. ALLPCB will definitely strive to achieve the improvement from”Manufactured in China” to”Manufactured in the globe”, making the innovation of global SMEs less difficult and delivering the persons better living through the help of technological innovations!

Contact with Us

Address: 12th Floor,West #2 Building, XinTianDi Business Center, #71-8 ShiXiang Road,XiaCheng District, Hangzhou City, China
Mailbox : service@ALLPCB.com

Based upon : http://www.allpcb.com/about_us.html

Easy Autorouter eagle demo PCB manufacturing avr arduino atmega Autoroute Autorouting

This is a demo to show how powerful and easy Autorouter is in eagle.

To do autorounter, you need to fine tune settings in DRC.
Some DRC preset setting files that work fine:
https://github.com/frankensteinXOXO/A…

Source

Eagle PCB Design With Matt Berggren

pcb-design

Eagle is a house-hold reputation for almost all Hackaday regulars. And here is the time to discover about forthcoming features, make your ‘how do I do this in Eagle?’ questions responded, and have your wishlist items heard. Join us on Friday at 12:00 PST for a real-time Hack Chat in relation to the Eagle PCB Design computer software.

Hosting this week’s conversation is Matt Berggren, also known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s acquisition of Eagle last summer, the trendy schematic design and PCB layout software falls under his grasp. He’s got an in depth heritage in designing printed circuit boards -if you possible could do it in EDA computer software he knows about how -this is actually an ideal chance to get addressed the questions that were stumping you.

Please do not miss this Hack Chat! Right here is a hassle-free online gadget to aid switch 1/13/17 at 12:00 PST to your localized time.

And here is How you can Take Part:

Hack Chat are live community events that occur in the Hackaday.io Hacker Channel. Pay a visit to that webpage (you should always be logged in) and check out the “Join this Project Button” in the top right. After you are associated with the Hacker Channel, that button will switch to “Team Messaging” that brings you to the Hack Chat.

You don’t ought to wait around for Friday, join Hack Chat at any time you enjoy and check out what the community currently is going over.

Come Along Next Week Way too for KiCad!
Are you even more of a KiCad guy than an Eagle guy? You’ll want to still drop by this week to find out if Matt changes your mind. But keep away your appointments next week when Wayne Stambaugh, among the list of lead developers of KiCad will join us for a Hack Chat on Friday, 1/20/17.

GPS Electronic Board Fab And PCBA Suppliers 2016

50% off our best selling FM Bug Transmitter at:
http://www.bug-transmitter.com

In this short video i am showing you how to design and get your
circuit boards manufactured ,its only a small simple single sided circuit board.

PCB manufacturer is : 5pcb.com

Thay are very reliable and of high quality.
Used them many times.

GPS Electronic Board Fab And PCBA Suppliers 2016

contract-pcb-china-01

YingStar Technology

Based on http://www.yingstar-pcba.com/choose.asp

YingStar Electronics Profile

To thoroughly offer our customers professional services with quickest time and most competitive cost, YingStar Technology possesses its own Printed Circuit Board manufacturing facility (built in 2002, located in MeiZhou , GuangDong ), Printed Circuit Board assy facility (founded in 2006, situated Bao’ An district, Shenzhen City) and Printed Circuit Board design staff. YingStar can provide one stop services ranging from Printed Circuit Board design, prototype making to volume Printed Circuit Board assy production. Of course, if you have placed volume order to YingStar and your design is new and have to be evolved or adjusted in the real world application, our veteran technical engineers can provide you the powerful support without asking for any extra cash.

Reasonable Price

YingStar consistently stock over 5000 frequently used components from leading vendors and always work with the world famous electronic elements distributors for example DigiKey, Mouser, Element14, Arrow, Avnet, and Future Electronics to make sure our logistics system is smooth and meet both the urgent demands and standard needs with shortest lead-time and reasonable cost.

On-time Delivery

We can do the prompt delivery and shorten customers’ wait time, due to the fact:
1, We generally stock above 5000 wide-spread components;
2, Now we have one of the most experienced procurement team and cooperate with internationally renowned electronic elements suppliers;
3, We possess our own Printed Circuit Board and PCB assy manufacturing facility;
4, We possess our own design department who is going to guide customers to get rid of the sophisticated technical problems.

Quality Guarantee

We guarantee that all the items we made are 100% qualified and have at least 1 year guarantee time period, but the condition is that all the components of the products are offered by us (including Printed Circuit Board, electronic elements and assy task). And for those products only partially services provided by us, we’re only responsible for the liability of the services provided by us.

Privacy

We treat your whole information as very confidential and do our best to give protection to your intellectual property (IP) legal rights.

The secrecy of your information is safeguarded with the next means and processes.

Approved entry only: To outer users, only verified users can access information which he/she is allowed to view. To interior users, access of information is on a need-to-know basis. Your information are compartmentalized and related to number IDs. One example is, our production technical engineers who are able to access design files can only see project and customer IDs; our shipping will not demonstrate billing particulars; and our accounting will never check out design files.

Security review: We execute everyday security review to upkeep our security criteria.

Deletion of information: We shall eliminate any certain information as requested.

Contact Us

Shenzhen YingStar Electronics Co., Ltd
Telephone: 0086-755-27808878
Telefax: 0086-755-27316461
Office Address: 302, Jin Li Hua Mansion, Gong Yuan Road, Bao’An 31 District, Shenzhen City, China ZIP Code:518101
Manufacturing plant Address:
6th floor, 2nd Building, Zhuguang East Road, Chuangxin Technology Park, Xinli Town, Nanshan District, Shenzhen, China

contract-pcb-china-01

Shenzhen MOKO Tech Limited

We Present a Wide Spread of Circuit Board Alternatives in Order to Fit All your PCB Requirements.

Moko Tech Limited founded in 2001, located within Shenzhen, China. has specialized in circuit board mfg + circuit board assy, located in Shenzhen, Guangdong, China. We’re focused upon manufacturing single-sided , double-sided and multilayer PCB boards, to a maximum of 18 layers. Besides that, we can provide elements acquisition and turn-key circuit board assy service.

With above a decade in the field of circuit board prototype and manufacture, we’re focused on suiting the needs of our customers from various industries with regard to quality, transport, cost-effectiveness and virtually any request(s). Being among the many most skilled circuit board makers in China, we are confident to be your most excellent partners .

In Shenzhen, we’re privileged as the first-rate supplier for a great many firms all across the globe. We can deliver lots of different services including circuit board mfg and circuit board assy for from sample orders to batch orders.

With regards to circuit board assembly, taking advantage of 8 high-speed SMT assembly lines brought from Japan Yamaha and Sony, we do our uttermost to meet up with our customers’ specifications.

One Stop Solution: In addition to Circuit Board Mfg

Our expanded expertise in circuit boards is not only confined to circuit board mfg but consists of just about all involved services consisting of circuit board design & layout and circuit board assy. Our professional design pros can assist you to realize economical perfection in your multi-layer layout or we are able to design your circuit from the beginning: from a basic double-sided board to elaborate rigid-flex PCB applications. In the year 2012, our subsidiary company – Shenzhen Eastwin Trading Limited founded with the intention to prolong overseas Market.

We have our 25,000 sq. feet cutting-edge manufacturing facility to give the quality standard you need…

We now have received the ISO9001:2000, ISO14001, UL plus ROHS certificates. At this point our circuit board potential arrives at 1,000 sqm. a day, and for circuit board assy can hit 100 mil units month-to-month.

We heavily recognize that our excellent service and practical experience will 100 % meet up with your expectations. Trustworthiness and enhancement are the forces that add up to our great results. We’re the most advantageous option to suit your needs.

For additional products and services, more discounts, or 100 percent free samples make sure to

Get a Hold of Us

Shenzhen MOKO Tech Limited
Telephone Number: 86-75523573370
Telefax: 86-75523573370-808
E-mail: alex@szeastwin.com
Address : 4F,Buidling #2,Guanghui Technology Zone,Minqing Road, Longhua Town, Shenzhen , China
Zipcode: 518109

According to http://www.mokotechnology.com/about/

contract-pcb-china-01

Topscom Tech Co.,Limited

In line with : http://www.topscom.com.cn/info-132-en.html

Enterprise Intro

20 Years Of Electronic products Entire OEM / ODM, Electronic Contract Manufacturing(also called ECM) and Circuit Card Assembling Solutions — Shenzhen Topscom

Topscom is a major Electronics Manufacturing Services (also called EMS) company devoted to supplying advanced design and manufacturing services to auto, industrial, health related, end-user, telecommunications, and tech businesses. With fiscal year 2013 profits of 360 Mil United states dollar, Topscom assists people design, construct, shipping, and electronic gadgets which provides customers with one-stop design, engineering, and fabrication resources which are vertically incorporated with elements to enhance their operations by lessening their expenditures and decreasing the period of time to markets.

Topscom allows for an vast range of fabricating, engineering and machining services, and these include in-house highly exact SMT mount, plastic material injection molding, high volume metal stamping, die-casting and customized fabrication.

Full-equipped Divisions

Our various sections are aligned to offer you an wide range of fabrication, engineering and machining services:
Our SMT expertise include 0201, zero-Lead and flip-chip processes.
Our plastic injection molding division is aligned with superior devices in white room and ice water cooling system. A specialized production line is furthermore built to eliminate and slice the material grain.
Our metal stamping division is equipped with CNC process center, silk machines along with drilling machines received from Japan and Taiwan.
In our mold tooling division, we benefit from Pro-Engineer premium software for reliable design support. Making use of EROWA grips, we can easily maintain the accuracy and precision within 3 ums.
To routinely keep qc system excellent, we routinely measure our test flow charts. We have procurement workplaces in Tokyo, Japan, Singapore and also Hong Kong run by our central supplies warehouse facility in Shenzhen.

Our plant is based in Shenzhen, China with a sum place of 200,Thousand square meters and more than 4 thousand laborers. We certainly count on the value of our workers and prefer to maintain a proficient attitude and teamwork civilization that supports creativity and boasts job pleasure.

The administration emphasizes continuous training, open interactions, group interaction and contribution in decision-making process.

With considerable knowledge of cooperating with high-tech businesses and diverse client base in wide range of products, we’re really self-assured and confident to supply amazing services, high pliability, inexpensive fab solutions and on time delivery for our purchasers.

Our prime clients list around the globe: Rda (Australia) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Netherlands), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (England), Cisco (U. S.).

Communicate with US

Tel: +86-755-22211988
Telefax:+86-755-83768890
Mailbox: frankwu@topscom.com.cn
Mobile :+86 13502814037
Address: #18, Tannan Road,Tanjia Industrial Zone,Gongming Street,Shenzhen , China.

Hong Kong Workspace:

Position : First Building Weigan Center JiuLong Hong Kong
Mailbox: ivy.ko@topscom.com.cn( Ms.Ivy Ko)

contract-pcb-china-01

ALLPCB Website

ALLPCB is the 1st international web-based platform with PCB prototyping and small-volume PCB manufacture services.
From 2013, ALLPCB has been aiming to deliver the most cost-effective PCB manufacture service and provide global SMEs with complete PCB design process and tech support from “Prototype to Production”. In an attempt to realize a rapid response to customers’ requirements, we’ve set up a highly potent service and support system. Our delivery performance, quality control, client support and rapid reaction to complaints bring about our top notch place in PCB world.

ALLPCB gains advantage from distinctive assets in some facets:

1. PCB Manufacturers

At least A hundred China-based PCB makers have moved into ALLPCB producer community, offering up 1 To 30 layers boards for PCB prototyping and small-volume PCB manufacture. They include multilayer board, high frequency board, metal core board, HDI board and rigid-flex board. The speediest leading time might be within 24 hours. All of the PCB manufacturer associates have passed our rigorous on-spot evaluation by qualified auditors about the environment, devices, materials, certificates and management. All the audit records are exposed and transparent on-line, being sure the manufacture capability validity of every PCB producer.

2. Parts

ALLPCB partners with about 30 celebrated elements distributors, supplying around 5 , 000, 000 electronic elements readily available. A minimum of 95% transactions will be sure to be shipped in 24 hours.

3. PCA(Printed Circuit Assembly)

ALLPCB works with around 10 PCBA makers with the capability of prototype and small-volume manufacture within just 2 To 3 days. And also the pass rate of finished products arrives at 99.9%.
ALLPCB has a ultra powerful team with 100+ consumer support persons and technicians . We furnish 24/7 service for international customers by way of email address, cell and real-time chat.
“Made in China, Favorite among the entire world” is the aim of ALLPCB presently. ALLPCB is going to aim to get to the change from”Produced in China” to”Produced in the globe”, making the advancement of worldwide SMEs easier and bringing the human beings significantly better life with the assistance of modern technology!

Get a Hold of Us

Location: 12F,West #2 Building, XinTianDi Business Center, #71-8 ShiXiang Road,XiaCheng District, Hangzhou , China
E-mail : service@ALLPCB.com

Dependent on : http://www.allpcb.com/about_us.html

Black Fr4 PCB Board Mfg & PCBA Service Providers List

Black Fr4 PCB Board Mfg & PCBA Service Providers List

contract-pcb-china-01

YingStar Electronics

In accordance with http://www.yingstar-pcba.com/choose.asp

YingStar Electronics Intro

To extensively offer our clients professional services with shortest time and most affordable cost, YingStar does have its Circuit Board manufacturing unit (established in The year 2002, located within MeiZhou City, GuangDong ), Circuit Board assembly manufacturing unit (built up in 2006, located within Bao’ An district, Shenzhen City) and Circuit Board design crews. YingStar can provide one stop services covering everything from Circuit Board design, prototype making to volume Circuit Board assembly production. And when you’ve placed volume order to YingStar and your design is new and must be enhanced or adjusted in the real world application, our competent technicians can provide you the sound support devoid of charging you any extra funds.

Economical Rate

YingStar often hold more than 5000 common parts from top notch producers and cooperate with the famous electronic elements vendors such as DigiKey, Mouser, Element14, , Avnet, and Future Electronics to ensure our logistics system is sleek and fulfill both the emergency requirements and basic needs with fastest lead-time and cut-throat competitive charge.

Punctual Delivery

We’re able to do the fast delivery and decrease customers’ wait time, due to the fact:
1, We usually keep about 5000 frequently used parts;
2, Now we have by far the most professional sourcing team and cooperate with internationally renowned electronic elements distributors;
3, We possess our own Circuit Board and PCB assembly manufacturing unit;
4, We possess our own design department who can guide customers to handle the complex technical disorders.

Quality Assurance

We make certain that all the products we made are 100% qualified and have at the least 1 year warranty time, but the condition is that all the parts of the products are supplied by us (which include Circuit Board, electronic elements and assembly job). And for those boards just partly services provided by us, we are only accountable for the liability of the services provided by us.

Confidentiality

We handle your whole information as highly secret and make every effort to give protection to your intellectual property (IP) legal rights.

The discretion of your information is secured with the following ways and procedures.

Authorised access only: To external users, only validated users have access to information that he/she is allowed to view. To interior users, access of information is on a need-to-know foundation. Your information are compartmentalized and linked to number IDs. For example, our production technicians who are able to observe design files can only see project and customer IDs; our shipping won’t present billing info; and our accounting cannot see design files.

Security review: We conduct regular security evaluation to keep our security specifications.

Removal of information: We can wipe off any specified information once required.

Speak to Us

Shenzhen YingStar Electronics Co., Ltd
Tel: 0086-755-27808878
Fax: 0086-755-27316461
Office Location: 302, Jin Li Hua Mansion, Gong Yuan Road, Bao’An 31 District, Shenzhen City, China Post Code:518101
Factory Location:
6F, #2 Building, Zhuguang East Road, Chuangxin Technology Park, Xinli Town, Nanshan District, Shenzhen, China

contract-pcb-china-01

China MOKO Tech Limited

We Supply a Full Selection of Electronic Circuit Board Capabilities in Order to Suit Every One of your PCB Demands.

Moko Tech Limited created in 2001, positioned in Shenzhen, China. has specialized in printed circuit board fab and printed circuit board assembly, headquartered in Shenzhen, China. We are specialized in producing single-sided , double-sided and multilayer PCB boards, as many as 18 layers. In addition to that, we can make available elements buying and one-stop printed circuit board assembly service.

With upwards of 10 years in the industry of printed circuit board prototype and mfg, we are dedicated to fulfilling the requires of our clients coming from many industries in terms of standard of quality, transport, cost and all other request(s). As one of the most expert printed circuit board makers in China, we have confidence to be your most useful business partners .

In China, we are respected as the high quality supplier for scores of businesses worldwide. We offer various services including printed circuit board fab and printed circuit board assembly for from sample orders through batch orders.

When it comes to printed circuit board assy, employing 8 high-speed SMT assy lines brought in from Japan Yamaha and Sony, we make our utmost to satisfy our customers’ requirements.

One Stop Solution: In excess of Electronic Circuit Board Fab

Our enhanced competence in printed circuit boards is not merely restricted to printed circuit board fab but gets to almost all associated services such as printed circuit board design / layout and printed circuit board assembly. Our professional design gurus can enable you to get to economical efficiency in your multi-layer layout or we are able to design your circuit from the beginning: from a easy double-sided board to challenging rigid-flex PCB applications. In 2012, our branch – Shenzhen Eastwin Trading Limited built as a way to expand global Business.

We possess our 25,000 sq. feet high tech manufacturing unit to supply the quality brilliance you desire…

We now have got the ISO9001:2000, ISO14001, UL and ROHS certificates. Currently our printed circuit board quantity comes to A thousand square meters on a daily, and for printed circuit board assembly can come to 100 million items month-to-month.

We seriously know that our superior service and practical experience will completely achieve your specifications. Loyalty and development are the causes that drive our great results. We are the best solution for your benefit.

For added services, more credits, or 100 percent free trial samples you ought to

Speak to Us

China MOKO Tech Ltd.
Telphone: 86-75523573370
Fax: 86-75523573370-808
Email Address: alex@szeastwin.com
Location : 4F,Buidling #2,Guanghui Science Zone,Minqing Rd, Longhua Town, Shenzhen City, China
Zipcode: 518109

Based on http://www.mokotechnology.com/about/

contract-pcb-china-01

Topscom Tech Co.,Ltd.

As per : http://www.topscom.com.cn/info-132-en.html

Firm Intro

20 Years Of Electronic products Entire Original equipment manufacturer / ODM, Electronic Contract Manufacturing(sometimes referred to as ECM) and Electronic Circuit Board Assembly Solutions — China Topscom

Topscom is a heading Electronics Manufacturing Services (often known as EMS) supplier dedicated to providing innovative design and manufacturing services to motor vehicle, manufacturing, medical, end-user, phone system, and tech enterprises. With budgetary year 2013 income of 360 Million Dollars, Topscom aids consumers design, make, shipping, and gadgets that provides buyers with complete design, engineering, and manufacture resources that are vertically bundled with elements to optimize their operations by bringing down their costs and minimizing the hours to markets.

Topscom supplies an broad choice of fabricating, engineering and machining services, which include in-house highly exact SMT mount, plastic material injection casting, high volume metal stamping, die-casting and customizable manufacturing.

Full-furnished Departments

Our various departments are aimed to provide you with an wide range of manufacturing, engineering and machining services:
Our SMT abilities take care of 0201, leadless and flip-chip processes.
Our plastic injection molding work group is aligned with innovative devices in white room and ice water air conditioning system. A exclusive production line is even created to clear away and slice the material grain.
Our metal stamping team features CNC process center, silk machines as well as drilling machines received from Japan and Taiwan.
In our mold tooling department, we choose Pro-Engineer premium software package for successful design support. By means of EROWA grips, we can maintain the accuracy and precision within 3 ums.
To keep qc strategy reliable, we frequently analyse our test flow charts. We have purchasing agencies in Tokyo, Singapore and Hong Kong managed by our centralized materials storage place in Shenzhen.

Our plant is located in Shenzhen, China with a total area of 200,Thousand sqms and in excess of 4,000 team members. We really believe in the importance of our office staff and wish to uphold a expert mindset and corporate and business civilization that fosters creativity and boasts job happiness.

The managing draws attentions to continual training, open communication, teamwork and engagement in decision-making process.

With significant experience with cooperating with high-tech corporations and diversified customer base in wide product range, we are really confident to deliver superb services, high pliability, less expensive fabrication solutions and prompt delivery for our people.

Our best customers list throughout the world: Rda (Australia) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Holland), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (Britain), Cisco (United States).

Get hold of US

Telephone: +86-755-22211988
Fax:+86-755-83768890
Inbox: frankwu[at]topscom.com.cn
Mobile phone :+86 13502814037
Location: No.18, Tannan Road,Tanjia Industrial Region,Gongming Street,Shenzhen City, China.

Hong Kong Workplace:

Address : 1st Building Weigan Center JiuLong Hong Kong
Inbox: ivy.ko[at]topscom.com.cn( Ms.Ivy Ko)

contract-pcb-china-01

ALLPCB Platform

ALLPCB is the 1st international web-based platform with PCB prototyping and small-run PCB mfg services.
After 2013, ALLPCB has been making an attempt to present the most cost-effective PCB mfg service and provide global SMEs with complete PCB design process and technical support from “Prototype to Production”. As a way to accomplish a rapid reaction to customers’ demands, we’ve introduced a reliable service and support system. Our delivery performance, quality control, customer care and fast answer to troubles give rise to our top notch position in PCB industry.

ALLPCB owns special assets in a number of aspects:

1. PCB Manufacturers

Around One hundred China-based PCB makers have joined up with ALLPCB producer circle, supplying 1 To 30 layers boards for PCB prototyping and small-run PCB mfg. They consist of multilayer board, high frequency board, metal core board, HDI board and rigid-flex board. The quickest lead time can be within 24 hours. All of the PCB manufacturer affiliates have passed on our tight on-spot evaluation by specialist auditors regarding the surroundings, devices, materials, certificates and management. All the examination information are available and transparent online, ensuring that the manufacture capability genuineness of every single PCB producer.

2. Parts

ALLPCB partners with more than 30 prominent elements vendors, offering above 5 million electronic elements handy. At a minimum 95% transactions will be sure to be shipped within the same day.

3. PCB Assembly

ALLPCB works together with above 10 PCBA makers with the power of prototype and small-run manufacture in 2 To 3 days. And also the pass rate of finished products achieves 99.9%.
ALLPCB has a powerful team with 100+ consumer support people and specialists . We furnish 24/7 service for international buyers by email address, telephone number and actual time chat.
“Made in China, Loved among the globe” is the chase of ALLPCB currently. ALLPCB definitely will strive to attain the shift from”Manufactured in China” to”Manufactured in the globe”, making the innovation of world-wide SMEs less of a challenge and bringing the human beings better life by means of science!

Speak to Us

Address: 12th Floor,West No.2 Building, XinTianDi Business Center, No.71-8 ShiXiang Road,XiaCheng District, Hangzhou , China
Email Address : service@ALLPCB.com

Dependent on : http://www.allpcb.com/about_us.html

Fast Turn PCB Board Fab And PCB’A Firms Collection

This video will show you how the layers of a multi-layer PCB are put together. Thank you very much to our PCB manufacturer http://www.PCBone.com/ where I could make this video. Enjoy 🙂

Fast Turn PCB Board Fab And PCB’A Firms Collection

contract-pcb-china-01

YingStar

In accordance with http://www.yingstar-pcba.com/choose.asp

YingStar Electronics Intro

To thoroughly offer our consumers professional services with basic time and lowest expense, YingStar Electronics possesses its own Electronic Circuit Board manufacturing plant (set up in The year 2002, situated in MeiZhou , GuangDong ), Electronic Circuit Board assy facility (founded in 2006, positioned in Bao’ An district, Shenzhen City) and Electronic Circuit Board design staff. YingStar offers one stop services that range from Electronic Circuit Board design, prototyping to bulk Electronic Circuit Board assy production. And in case you have placed volume order to YingStar and your design is fresh and have to be enhanced or changed in the realistic application, our veteran technicians can provide you the solid support free of charging you any other money.

More competitve Fee

YingStar consistently store in excess of 5000 commonly used elements from superior manufacturers and cooperate with the famous electronic elements dealers for example DigiKey, Mouser, Element14, , Avnet, Maxim and Future Electronics to guarantee our supply chain system is sleek and serve both the urgent requirements and standard demands with shortest lead-time and highly competitive cost.

On-time Delivery

We can easily do the on time delivery and decrease buyers’ wait time, for the reason that:
1, We consistently stock about 5000 commonly used elements;
2, Our company has quite possibly the most professional purchasing team and cooperate with well-known electronic elements suppliers;
3, We have our own Electronic Circuit Board and PCB assy manufacturing plant;
4, We have our own design department who can guide buyers to address the sophisticated technical disorders.

Quality Assurance

We guarantee that all of the products we made are 100% qualified and have not less than one year warranty period, but the requirement is that all of the elements of the products are provided by us (this include Electronic Circuit Board, electronic elements and assy task). And for those products only partly services furnished by us, we’re only accountable for the liability of the services provided by us.

Secrecy

We treat your whole information as very sensitive and make every effort to look after your intellectual property (IP) legal rights.

The discretion of your information is secured with the next means and operations.

Authorized entry only: To exterior users, only authenticated users can access information which he/she is allowed to uncover. To inner users, access of information is on a need-to-know basis. Your information are compartmentalized and linked to number IDs. To illustrate, our production specialists who is going to access design files can just see project and customer IDs; our shipping and delivery will never display billing information; and our accounting can’t check design files.

Security audit: We conduct everyday security examination to keep on our security specifications.

Erradication of information: We will erase any certain information when asked for.

Converse to Us

Shenzhen YingStar Electronics Co., Ltd
Telephone: 0086-755-27808878
Facsimile: 0086-755-27316461
Office Address: 302, Jin Li Hua Mansion, Gong Yuan Road, Bao’An 31 District, Shenzhen City, China ZIP Code:518101
Manufacturing facility Address:
6F, 2nd Building, Zhuguang East Road, Chuangxin Technology Park, Xinli Town, Nanshan District, Shenzhen, China

contract-pcb-china-01

MOKO Technology Ltd

We Present a Large Variety of Electronic Board Choices to Suit Each of your PCB Specifications.

Moko Technology Ltd founded in the year 2001, positioned in Shenzhen, China. is an expert in circuit card mfg + circuit card assembly, located in Shenzhen, Guangdong, China. We are focused upon fabricating single-sided , double-sided and multilayer PCB boards, up to 18 layers. Even better, we are able to deliver elements ordering and turnkey circuit card assembly service.

With above 10 years in the realm of circuit card prototype and fabricating, we’re committed to meeting the demands of our consumers coming from a range of industries with regards to craftsmanship, delivery, expenditure and some other request(s). As being among the most skilled circuit card manufacturers in China, we have confidence to become your ideal partners .

In Shenzhen, we’re honored as the brilliant supplier for lots of companies internationally. We offer a variety of services including circuit card mfg and circuit card assembly for from prototype orders through batch orders.

Regarding circuit card assembling, taking advantage of 8 high-speed SMT assembling lines brought in from Japan Yamaha and Sony, we make our best to meet our buyers’ demands.

One-stop Solution: Further than Electronic Board Fab

Our raised experience in electronic boards is not merely confined to circuit card mfg but consists of most involved services such as circuit card design & layout and circuit card assembly. Our skilled design specialists can assist you to get economical excellence in your multi-layer design and layout or we can design your circuit over completely from scratch: from a very simple double-sided board to complex rigid-flex PCB applications. In the year 2012, our subsidiary company – Shenzhen Eastwin Trading Ltd built with a view to extend abroad Business.

We possess our 25,000 square ft. modern production line to deliver the quality consistency you desire…

We’ve attained the ISO9001:2000, ISO14001, UL and also ROHS accreditations. Right now our circuit card capacity reaches up to One thousand square meters each day, and for circuit card assembly can realize 100 million items per 30 days.

We seriously assume that our reliable service and expertise will utterly fit your needs. Honesty and development are the drives that lead to our victory. We are the most effective option to suit your needs.

To get more services, more discounts, or 100 % free trials you ought to

Find Us

MOKO Technology Limited
TEL: 86-75523573370
Facsimile: 86-75523573370-808
Mailbox: alex@szeastwin.com
Address : 4F,Buidling #2,Guanghui Technology Park,Minqing Rd, Longhua Town, Shenzhen , China
Zip Code: 518109

In accordance to http://www.mokotechnology.com/about/

contract-pcb-china-01

Topscom Technology Co.,Limited

Depending on : http://www.topscom.com.cn/info-132-en.html

Corporation Intro

20 Years Of Electronic products Complete OEM / ODM, Electronic Contract Manufacturing(sometimes known as ECM) and PCB Assembling Services — Shenzhen Topscom

Topscom is a top Electronics Manufacturing Services (sometimes referred to as EMS) source dedicated to delivering new design and fabricating services to motor vehicle, commercial, medical, prospects, telephone system, and tech businesses. With monetary year 2013 income of 360 Mil Us dollars, Topscom assists buyers design, fabricate, shipping and delivery, and gadgets which presents consumers with overall design, engineering, and manufacture resources that are vertically included with elements to boost their operations by decreasing their rates and lessening the period to markets.

Topscom delivers an vast number of fabricating, engineering and machining services, for instance in-house highly precise SMT mount, plastic material injection casting, high volume metal stamping, die-casting and custom-made manufacturing.

Full-outfitted Business units

Our different sectors are aligned to provide an extensive range of manufacturing, engineering and machining solutions:
Our SMT potential address 0201, leadless and flip-chip techniques.
Our plastic injection molding division is aligned with advanced equipment in white room and cold water cooling system. A specialized production line is as well designed to remove and slice the material grain.
Our metal stamping team comes with CNC process center, silk devices and drilling devices from Japan and Taiwan.
In our mold tooling team, we choose Pro-Engineer advanced software package for valuable design support. Utilizing EROWA grips, we can restrain the accuracy within 3 ums.
To keep qc system reliable, we continuously measure our test flow tables. Additionally we maintain procurement workplaces in Tokyo, Japan, Singapore as well as Hong Kong manipulated by our centralized materials warehouse facility in Shenzhen.

Our manufacturing area is headquartered in Shenzhen, China with a total region of 200,Thousand square meters and in excess of 4,000 laborers. We definitely trust in the worth of our workers and prefer to keep a qualified attitude and teamwork culture that helps bring about creativeness and delivers job happiness.

The supervision draws attentions to continuing training, open communicating, teamwork and contribution in decision-making process.

With great experience in cooperating with high-tech companies and varied customers in wide product range, we’re pretty positive to supply amazing solutions, high pliability, cheap fabricating solutions and on time delivery for our purchasers.

Our major customers list in the world: Rda (Sydney) , Bestdl (Belgium), Sqp (France), Destst, Metro (Israel), Aji, Fujitsu, Sony (Japan), Dgsb (Malaysia), Rdi (Netherlands), Mlcroalp(Singapore), Inventron, Tempel (Spain), Imc (British), Cisco (United States of America).

Contact with US

Tel: +86-755-22211988 (50 Line)
Facsimile:+86-755-83768890
Inbox: frankwu@topscom.com.cn
Phone :+86 13502814037
Address: No.18, Tannan Road,Tanjia Industrial Zone,Gongming Street,Shenzhen , China.

HK Workplace:

Position : 1st Building Weigan Center JiuLong HK
Inbox: ivy.ko@topscom.com.cn( Ms.Ivy Ko)

contract-pcb-china-01

ALLPCB Network

ALLPCB is the first world-wide on-line platform with PCB prototyping and low-quantity PCB fabricating services.
From 2013, ALLPCB has been striving to make available the most cost-effective PCB fabricating service and supply worldwide SMEs with complete PCB design process and technical support from “Prototype to Production”. As a way to accomplish a rapid reaction to customers’ requirements, we now have made a potent service and support system. Our delivery performance, quality control, customer care and speedy reaction to troubles outcome our premier position in PCB field.

ALLPCB has distinctive resources in a lot of areas:

1. PCB Makers

Upwards of A hundred Chinese PCB manufacturers have signed up with ALLPCB manufacturer community, offering 1 – 30 layers boards for PCB prototyping and low-quantity PCB fabricating. They feature multilayer board, high frequency board, metal core board, HDI board and rigid-flex board. The quickest lead time can be within just 24 hours. Every one of the PCB manufacturer associates have passed on our tight on-spot review by competent auditors about the environment, equipments, materials, accreditations and management. All of the review documents are wide open and transparent online, assuring the manufacture capability credibility of each and every PCB manufacturer.

2. Parts

ALLPCB partners with around 30 widely known elements dealers, offering up in excess of 5 million electronic elements in store. At the least 95% transactions will be sure to be shipped within a day.

3. PCB Assy

ALLPCB works with in excess of 10 PCBA manufacturers with the power of prototype and low-quantity manufacture in 2 – 3 days. And also the pass rate of finished products goes to 99.9%.
ALLPCB features a successful team with 100+ customer service persons and specialists . We present 24/7 service for world-wide consumers via email address, telephone and live chat.
“Produced in China, Used by the planet” is the pursuit of ALLPCB now. ALLPCB will definitely make an effort to accomplish the transformation from”Made in China” to”Made in the world”, making the advancement of world-wide SMEs significantly easier and bringing the people significantly better life with the help of science!

Find Us

Address: 12th Floor,West No.2 Building, XinTianDi Business Center, No.71-8 ShiXiang Road,XiaCheng Dist, Hangzhou , China
Mailbox : service@ALLPCB.com

Using : http://www.allpcb.com/about_us.html