PCBデザインチェック.wmv

PCBデザインチェックのご紹介。
PCBデザインチェックは、基板設計のデータを、専用CADを必要とすることなく、確認やパターン間の間隔などを簡単に検証できる検証専用ソフトウェアです。 ガーバーデータにNCデータを加え、さらにマウントデータなどを取り込み、各社CAD製造データからCAD設計検証が可能になります。

source

Circuit Card Fabricating in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., founded on Apr 1, 2014 upon succeeding the entire Circuit Board business from AICA Kogyo Co., Ltd., delivers the full solution for the Circuit Board products that include pattern-designing, simulation for getting good high-speed signal quality and EMC, and Circuit Board manufacturing of different quantities. Our expert consulting service is available too for the analysis of electrical characteristics at an early phase of Circuit Board Development.

Our corporation name “RITA”(selected from the thoughts by our team) means the “Real Integrated Technology and Advisory” to represent our promise to the technical brilliance and the high standard of services to our shoppers.

In Dec 2016, all the shares of RITA Electronics, Ltd. were properly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We are expecting a great many synergy effects from the vertical incorporation of Taishodo’s Electric Manufacturing Service and our Circuit Board products.

Because of the support from all our buyers and business partners, we performed our first 3 business years in success. We continue to pursue much higher level of technologies to comply with our customers’ criteria.

We appreciate your constant support and encouragement!

Find Us

Telphone: 052-930-6151
Facsimile: 052-930-6157
Inbox: rp.deri@ritael.co.jp

In keeping with https://ritael.co.jp/english/

Yamamoto

Yamamoto‘s Circuit Card manufacturing facilities in Japan and China give you a number of support from very first prototype to production – all factories direct attention to high product mix in volume production across a range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Firm Overview

Yamamoto Mfg. Ltd. commenced in 1945 in the watchcase-metallurgy business and successfully created this business in Japan, Korea, and also China.

In 1968, Yamamoto parlayed their metallurgical and plating specialist knowledge into Circuit Cards with an original factory in Tokorozawa Japan – Yamamoto’s initial venture into Circuit Cards was fueled by a large contract in 1968 with IBM Yasu Japan and development and research projects with a couple of top rated Japanese OEM’s. A further Advanced Technology facility was established in Honjo Japan in 1985 and additionally Expanded in 2001. Yamamoto has additionally new Circuit Card manufacturing unit in the Guangdong Province of China which launched in 2008.

In Japan due to two Advanced Technology facilities and two Drill-Plating Support facilities with over 700K sq. ft. of manufacturing space as well as our factory in China mainland, Yamamoto is well positioned to support all Circuit Card technology levels throughout the world without ever decreasing quality.

E-mail us
sales@yusa.com

In keeping with http://yusa.com/

3分でわかるQuadcept

クアッドセプトは、高機能で低価格な回路図エディタ、PCB設計ツールです。
初期費用、更新費用ともに「0円」なのが特徴です。
「クラウド化」「低コスト」「現場の声で進化」「イノベーション」でという4
つのコンセプトで、グローバルでの設計、開発業務の効率化を行い、より良い
サービス提供を行っています。

[Schematic/Circuit Editor] [PCB Designer/3D] [回路図エディタ][プリント基板][プリント基板製造][プリント基板設計]

■ Quadceptのダウンロードはこちら
https://www.quadcept.com/ja/index.html

———————————–
♡ Quadcept
https://www.quadcept.com/

♡ 完全無償のネット変換/照合サービス【NET CHANGER】
https://netlist.quadcept.com/
♡ Blog
http://blog.quadcept.com/
♡ FACEBOOK
https://www.facebook.com/quadcept
♡ TWITTER

————————————————————–

★ これまでの動画一覧
https://www.youtube.com/channel/UCjPl15UJ0-WVfPkmSsORJrw

————————————————————–

■製品概要
https://www.quadcept.com/ja/product/index.html

■サポートトップ
 http://www.quadcept.com/ja/faq/

■フォーラムサイト
http://forum.quadcept.com/

■オンラインマニュアル
http://www.quadcept.com/ja/manual

■Youtube Quadcept
 http://www.youtube.com/user/QuadceptManual

■チュートリアルマニュアルダウンロード先
http://www.quadcept.com/ja/manual/download/latest/

circuit editor,Schematic,cloud,PCB,3D,CAD,Maker,Electronics,
Industry4.0, Techshop,fablab,PCB Manufacturing,Layout,Mount,
BOM,parts library,Symbol,Footprint,Digi-Key,RS,Chip1stop,Subscription,
Pay as you go,

source

Printed Circuit Board Manufacture in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., established on Apr 1, 2014 upon succeeding the whole PCB Board business from AICA Kogyo Co., Ltd., provides the complete solution for the PCB Board products such as pattern-designing, simulation for getting good high-speed signal quality and EMC, and PCB Board manufacture of various quantities. Our specialist consultation service is made available for the analysis of electrical characteristics at an beginning phase of PCB Board Development.

Our business name “RITA”(picked from the ideas by our workers) signifies the “Real Integrated Technology and Advisory” to signify our dedication to the technological superiority and the high standard of services to our consumers.

In December 2016, all of the shares of RITA Electronics, Ltd. were appropriately transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We look forward to scores of synergy effects from the vertical integration of Taishodo’s Electronic Manufacturing Service and our PCB Board products.

Thanks to the support from all our customers and partners, we performed our first 3 business years in success. We continue to pursue much higher level of technologies to comply with our clients’ criteria.

We are grateful for your constant support and encouragement!

Reach Out to Us

TEL: 052-930-6151
Telefax: 052-930-6157
Email: rp.deri@ritael.co.jp

Using https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s Printed Circuit Board manufacturing area in Japan and China present you with a wide variety of support from very first prototype to production – all factories aim for high product mix in volume production across various technologies from the industry-common to the next-generation challenges.

Yamamoto. Company Overview

Yamamoto Mfg. Ltd. commenced in 1945 in the watchcase-metallurgy business and successfully established this business in Japan, Korea, as well as China.

In 1968, Yamamoto parlayed their metallurgical and plating working experience into Printed Circuit Boards with an initial plant in Tokorozawa Japan – Yamamoto’s initial foray into Printed Circuit Boards was supported by a significant contract in 1968 with IBM Yasu Japan and research and development projects with some foremost Japanese OEM’s. A further Advanced Technology facility was launched in Honjo Japan in 1985 and additionally Expanded in 2001. Yamamoto has also new Printed Circuit Board factory in the Guangdong Province of China that opened in 2008.

In Japan by means of two Advanced Technology manufacturing facilities and two Drill-Plating Support facilities with around 700K sq. ft. of manufacturing space in addition to our production line in China Dongguan, Yamamoto is well positioned to back up all Printed Circuit Board technology levels all over the globe without ever bringing down quality.

E-mail us
sales@yusa.com

Using http://www.yusa.com/

【Quadcept】ピックアップ機能

ハイエンドクラスの機能性とハイコストパフォーマンスを実現するQuadceptの主な機能をご紹介します。(Quadcept ver 2013)

[Schematic/Circuit Editor] [PCB Designer/3D] [回路図エディタ][プリント基板][プリント基板製造][プリント基板設計]

■ Quadceptのダウンロードはこちら
https://www.quadcept.com/ja/index.html

———————————–
♡ Quadcept
https://www.quadcept.com/

♡ 完全無償のネット変換/照合サービス【NET CHANGER】
https://netlist.quadcept.com/
♡ Blog
http://blog.quadcept.com/
♡ FACEBOOK
https://www.facebook.com/quadcept
♡ TWITTER

————————————————————–

★ これまでの動画一覧
https://www.youtube.com/channel/UCjPl15UJ0-WVfPkmSsORJrw

————————————————————–

■製品概要
https://www.quadcept.com/ja/product/index.html

■サポートトップ
 http://www.quadcept.com/ja/faq/

■フォーラムサイト
http://forum.quadcept.com/

■オンラインマニュアル
http://www.quadcept.com/ja/manual

■Youtube Quadcept
 http://www.youtube.com/user/QuadceptManual

■チュートリアルマニュアルダウンロード先
http://www.quadcept.com/ja/manual/download/latest/

circuit editor,Schematic,cloud,PCB,3D,CAD,Maker,Electronics,
Industry4.0, Techshop,fablab,PCB Manufacturing,Layout,Mount,
BOM,parts library,Symbol,Footprint,Digi-Key,RS,Chip1stop,Subscription,
Pay as you go,

source

PCB Manufacturing in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., started on April 1, 2014 upon succeeding the complete PCB Board business from AICA Kogyo Co., Ltd., offers the over-all solution for the PCB Board products that include pattern-designing, simulation for getting good high-speed signal quality and EMC, and PCB Board manufacture of different quantities. Our expert consulting service is available for the analysis of electrical characteristics at an beginning phase of PCB Board Development.

Our corporate name “RITA”(selected from the ideas by our personnel) symbolizes the “Real Integrated Technology and Advisory” to represent our commitment to the technological brilliance and the high level of services to our consumers.

In Dec 2016, all the shares of RITA Electronics, Ltd. were duly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We look forward to some collaboration effects from the vertical integration of Taishodo’s Electronics Manufacturing Service and our PCB Board products.

As a result of the support from all of our buyers and business partners, we performed our first 3 business years in success. We will continue to pursue much higher level of technologies to comply with our shoppers’ demand.

We are grateful for your continued support and encouragement!

Make Contact with Us

Contact Tel: 052-930-6151
Fax: 052-930-6157
E-mail: rp.deri@ritael.co.jp

In accordance with https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s PCB manufacturing units in Japan and China present you with a variety of support from initial prototype thru production – all facilities target high product mix in volume production across many technologies from the industry-common to the next-generation challenges.

Yamamoto. Corporation History

Yamamoto Mfg. Ltd. commenced in the year 1945 in the watchcase-metallurgy business and successfully established this business in Japan, Korea, and additionally China.

In the year 1968, Yamamoto parlayed their metallurgical and plating specialist knowledge into PCBs with an very first factory in Tokorozawa Japan – Yamamoto’s initial foray into PCBs was fueled by a large contract in 1968 with IBM Yasu Japan and development and research projects with a multitude of major Japanese OEM’s. An additional Advanced Technology plant was began in Honjo Japan in 1985 and furthermore Expanded in the year 2001. Yamamoto also has new PCB factory in the Guangdong Province of China that opened in 2008.

In Japan with the help of 2 Advanced Technology manufacturing facilities and 2 Drill-Plating Support facilities with above 700K sq. ft. of manufacturing space together with our factory in China Dongguan, Yamamoto is well positioned to support all PCB technology levels across the world without ever bringing down level of quality.

Make contact
sales@yusa.com

In accordance with http://www.yusa.com/

Quadcept × PollEx

Quadceptが、検図ツールの PollEx DFM(Design for Manufacturability)、PollEx DFE(Design for Electrical)と1クリックで連携。
さらに、プリント基板設計画面と検図結果画面のシンクロにより、検図工数の大幅短縮を実現!

[Schematic/Circuit Editor] [PCB Designer/3D] [回路図エディタ][プリント基板][プリント基板製造][プリント基板設計]

■ Quadceptのダウンロードはこちら
https://www.quadcept.com/ja/index.html

———————————–
♡ Quadcept
https://www.quadcept.com/

♡ 完全無償のネット変換/照合サービス【NET CHANGER】
https://netlist.quadcept.com/
♡ Blog
http://blog.quadcept.com/
♡ FACEBOOK
https://www.facebook.com/quadcept
♡ TWITTER

————————————————————–

★ これまでの動画一覧
https://www.youtube.com/channel/UCjPl15UJ0-WVfPkmSsORJrw

————————————————————–

■製品概要
https://www.quadcept.com/ja/product/index.html

■サポートトップ
 http://www.quadcept.com/ja/faq/

■フォーラムサイト
http://forum.quadcept.com/

■オンラインマニュアル
http://www.quadcept.com/ja/manual

■Youtube Quadcept
 http://www.youtube.com/user/QuadceptManual

■チュートリアルマニュアルダウンロード先
http://www.quadcept.com/ja/manual/download/latest/

circuit editor,Schematic,cloud,PCB,3D,CAD,Maker,Electronics,
Industry4.0, Techshop,fablab,PCB Manufacturing,Layout,Mount,
BOM,parts library,Symbol,Footprint,Digi-Key,RS,Chip1stop,Subscription,
Pay as you go,

source

Electronic Board Fab in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., established on April 1, 2014 upon succeeding the entire PCB business from AICA Kogyo Co., Ltd., provides the overall solution for the PCB products for example, pattern-designing, simulation for attaining good high-speed signal quality and EMC, and PCB manufacture of varied quantities. Our professional consultation service is available too for the analysis of electrical characteristics at an early stage of PCB Development.

Our company name “RITA”(chosen from the ideas by our employees) symbolizes the “Real Integrated Technology and Advisory” to stand for our dedication to the technological brilliance and the high class of services to our consumers.

In December 2016, all the shares of RITA Electronics, Ltd. were duly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We expect to see a lot of synergy effects from the vertical integration of Taishodo’s Electric Manufacturing Service and our PCB products.

Because of the support from all of our clients and partners, we performed our first three business years in success. We will continue to go after higher level of technologies to comply with our clients’ requirement.

We are grateful for your continued support and encouragement!

Make Contact with Us

Contact Tel: 052-930-6151
Facsimile: 052-930-6157
Email Address: rp.deri@ritael.co.jp

Founded on https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s Electronic Board manufacturing units in China and japan give you a wide selection of support from original prototype thru production – all facilities give full attention to high product mix in volume production across a wide range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Corporation Overview

Yamamoto Mfg. Ltd. commenced in 1945 in the watchcase-metallurgy business and successfully built up this business in Japan, Korea, and additionally China.

In 1968, Yamamoto parlayed their metallurgical and plating knowledge into Electronic Boards with an first factory in Tokorozawa Japan – Yamamoto’s initial venture into Electronic Boards was driven by a big contract in 1968 with IBM Yasu Japan and development and research projects with some reputable Japanese OEM’s. One more Advanced Technology production line was launched in Honjo Japan in 1985 and additionally Expanded in 2001. Yamamoto also has new Electronic Board factory in the Guangdong Province of China which opened in 2008.

In Japan with the help of two Advanced Technology production facilities and two Drill-Plating Support facilities with around 700K sq. ft. of manufacturing space in addition to our manufacturing Facility in China Dongguan, Yamamoto is well positioned to back up all Electronic Board technology levels across the world without ever compromising level of quality.

Send email
sales@yusa.com

Founded on http://www.yusa.com/

3分でわかるQuadcept

[Schematic/Circuit Editor] [PCB Designer/3D] [回路図エディタ][プリント基板][プリント基板製造][プリント基板設計]

■ Quadceptのダウンロードはこちら
https://www.quadcept.com/ja/index.html

———————————–
♡ Quadcept
https://www.quadcept.com/

♡ 完全無償のネット変換/照合サービス【NET CHANGER】
https://netlist.quadcept.com/
♡ Blog
http://blog.quadcept.com/
♡ FACEBOOK
https://www.facebook.com/quadcept
♡ TWITTER

————————————————————–

★ これまでの動画一覧
https://www.youtube.com/channel/UCjPl15UJ0-WVfPkmSsORJrw

————————————————————–

■製品概要
https://www.quadcept.com/ja/product/index.html

■サポートトップ
 http://www.quadcept.com/ja/faq/

■フォーラムサイト
http://forum.quadcept.com/

■オンラインマニュアル
http://www.quadcept.com/ja/manual

■Youtube Quadcept
 http://www.youtube.com/user/QuadceptManual

■チュートリアルマニュアルダウンロード先
http://www.quadcept.com/ja/manual/download/latest/

circuit editor,Schematic,cloud,PCB,3D,CAD,Maker,Electronics,
Industry4.0, Techshop,fablab,PCB Manufacturing,Layout,Mount,
BOM,parts library,Symbol,Footprint,Digi-Key,RS,Chip1stop,Subscription,
Pay as you go,

source

PCB Fabricating in Spain

Yamamoto‘s PCB manufacturing units in Japan and China present you with a wide selection of support from very first prototype to production – all facilities center on high product mix in volume production across a wide range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Corporation Overview

Yamamoto Mfg. Ltd. began in the year 1945 in the watchcase-metallurgy business and successfully set up this business in Japan, Korea, and China.

In the year 1968, Yamamoto parlayed their metallurgical and plating knowledge into PCBs with an original plant in Tokorozawa Japan – Yamamoto’s initial venture into PCBs was supported by a significant contract in 1968 with IBM Yasu Japan and research and development projects with a few foremost Japanese OEM’s. Another Advanced Technology manufacturing facility was began in Honjo Japan in 1985 and further Expanded in the year 2001. Yamamoto has also new PCB manufacturing area in the Guangdong Province of China which established in 2008.

In Japan by way of two Advanced Technology factories and two Drill-Plating Support facilities with more than 700K sq. ft. of manufacturing space as well as our manufacturing Facility in China Dongguan, Yamamoto is well positioned to support all PCB technology levels across the globe without ever limiting quality level.

Contact us today
sales@yusa.com

Using http://www.yusa.com/

製造業 株式会社さくら電子 愛知県北名古屋市

http://sakura-elec.com/outline/index.html

厚銅基板(大電流基板)…
当社は、電子回路設計・基板設計(アートワーク設計)基板試作・基板量産・基板実装を対応。
基板設計・基板の事はさくら電子へ。また、LED安全ベスト・LED帽子・LED誘導棒もさくら電子へ。
1)各種プりント基板の設計・試作・量産・実装・組立。
(1層~40層板。フレキ、アルミ基板、大型基板、鉛フリー、ハロゲンフリー基板。鉛フリー実装)
2)電子機器の設計開発〔ハード・ソフト)電子回路設計、筐体設計・機構設計。
3)各種モーター、ヒーター、音声合成。ユニット。
4)メタルマスク製作・販売=当日発送(1日作成から)
5)各種ハーネス、ケーブル加工。半田パレット・各種検査治具の設計・製作。
6)光シート・光チューブ販売。
7)LED照明用基板(アルミ基板など)設計・試作・量産まで一括対応。(国内・海外)
8)イニシャル不要試作・各種プリント基板実装(土・日・休日対応)をはじめました。
9)プリント基板アートワーク設計(CAD設計)プリント基板設計技能士1級取得。
10)安全商品(LED安全チョッキ(安全ベスト)・LED誘導棒・LED帽子など)の設計・製作・販売。
当社のモットーは,スピードと選択肢の多さと提案力。海外生産も可能。量産基板は、生産キャパが豊富。国内13万平米海外100万平米。試作は、短納期対応可能〔1日~)。当社には、プリント基板設計技能士1級(国家資格)取得の設計者がおります。経験も20年以上。設計CADは、CR-5000PWS・CR-5000BD.などCAD種類が豊富です。

※この度、「人の命を守る」安全商品を製作・販売する事になりました。夜間視認性が高く、利便性や品質を重視した、LED安全ベスト、LED誘導棒、LED帽子、LEDヘルメットバンド、LEDベルト、LED腕輪など多くの製品が出来ました。素材を厳選し、国内生産に拘った、画期的な製品です。海外品も販売をしています。興味・関心のある方は、当社のホームページをご覧ください。付加価値が高く、品質、耐久性を重視した製品が多くあります。

〒481-0043 愛知県北名古屋市沖村西ノ郷4番地
TEL:0568-25-4811 ⁄ FAX:0568-25-4812

制作:株式会社オールムービー・ジャパン

source

PCB Manufacturing in the Spanish Mainland

Yamamoto‘s PCB manufacturing facilities in China and japan present you with a great number of support from original prototype through production – all production sites pay attention to high product mix in volume production across a number of technologies from the industry-common to the next-generation challenges.

Yamamoto. Enterprise Profile

Yamamoto Mfg. Ltd. started in 1945 in the watchcase-metallurgy business and successfully established this business in Japan, Korea, and China.

In 1968, Yamamoto parlayed their metallurgical and plating knowledge into PCBs with an first plant in Tokorozawa Japan – Yamamoto’s initial venture into PCBs was fueled by a significant contract in 1968 with IBM Yasu Japan and development and research projects with a couple of prominent Japanese OEM’s. Some other Advanced Technology manufacturing plant was established in Honjo Japan in 1985 and furthermore Expanded in 2001. Yamamoto in addition has new PCB factory in the Guangdong Province of China which started in 2008.

In Japan with two Advanced Technology production facilities and two Drill-Plating Support facilities with in excess of 700K sq. ft. of manufacturing area as well as our manufacturing unit in China mainland, Yamamoto is well positioned to back up all PCB technology levels internationally without ever reducing quality.

Write to us
sales@yusa.com

Source http://yusa.com/

【CADLUS PCB】本格無料プリント基板設計CADご紹介

日本製のCADとして15万以上と国内最大級のダウンロード数を誇る無料版CADの本格プロ用CADLUSシリーズから契約基板工場で基板製造が可能な
最新プリント基板設計用無料版CADの【CADLUS PCB】のリリース。
CADLUS PCBは簡単に基板設計ができて、作成して保存したCADデータを全国契約基板工場へ送るだけで基板製造が簡単に行えます。(CADLUS X , CADLUS Zとのデータ互換有)

詳しくはこちら
http://www.cadlus.com

【CADLUS PCB】無料だけど本格機能のプリント基板設計CADシステムです。
① 基板設計環境が初期設定済み
② 8層までの基板に対応
③ 部品点数や基板外形制限無し
④ 部品ライブラリ8700点以上を無料標準提供(随時更新)
⑤ 基板設計に必要な機能が全て搭載
⑥ 各社回路図ネットデータ自動取り込み
⑦ 自動機能で簡単に基板設計が可能
・ 自動外形作成機能、自動配線機能、
自動部品作成機能、自動デザインルールチェック機能、
面付け機能、などさまざまな業務効率の上がる機能が満載です。

source

Circuit Card Manufacturing in the Spanish Mainland

Yamamoto‘s Circuit Card manufacturing facilities in China and japan provide a broad range of support from preliminary prototype to production – all facilities concentrate on high product mix in volume production across a wide variety of technologies from the industry-common to the next-generation challenges.

Yamamoto. Company Overview

Yamamoto Mfg. Ltd. commenced in 1945 in the watchcase-metallurgy business and successfully established this business in Japan, Korea, and also China.

In 1968, Yamamoto parlayed their metallurgical and plating expertise into Circuit Cards with an original plant in Tokorozawa Japan – Yamamoto’s initial venture into Circuit Cards was driven by a significant contract in 1968 with IBM Yasu Japan and research and development projects with a couple of leading Japanese OEM’s. A second Advanced Technology manufacturing plant was started in Honjo Japan in 1985 and furthermore Expanded in 2001. Yamamoto has new Circuit Card factory in the Guangdong Province of China that launched in 2008.

In Japan with two Advanced Technology manufacturing facilities and two Drill-Plating Support facilities with all over 700K sq. ft. of manufacturing space together with our production line in China mainland, Yamamoto is well positioned to support all Circuit Card technology levels across the world without ever reducing quality.

Email us
sales@yusa.com

In keeping with http://yusa.com/

Eagle 6.5 Circuit and PCB Project:Audio Amp

Using Eagle 6.5 to create a schematic and PCB Layout.

Source

Eagle PWB Design With Matt Berggren

pcb-design

Eagle is a household reputation for virtually all Hackaday regulars. And here is your opportunity to be familiar with imminent features, make your ‘how do I do this in Eagle?’ questions resolved, and have your wishlist items heard. Come along on Friday at 12:00 PST for a real-time Hack Chat about the Eagle PWB Design application.

Hosting this week’s discussion is Matt Berggren, also known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s buying of Eagle last summer, the famous schematic design and PWB layout software falls under his grasp. He’s a wide-ranging history in designing printed circuit boards -if you’re able to do it in EDA software application he knows about how -it is an incredible opportunity to get responded the important questions which have been stumping you.

Really don’t neglect the Hack Chat! Here’s a practical online application to aid transform 1/13/17 at 12:00 PST to your local time.

Here is The way to Play A Part:

Hack Chat are live community incidents that happen in the Hackaday.io Hacker Channel. Head to that webpage (remember to be logged in) and try to find the “Join this Project Button” in the top right. When you’re a member of the Hacker Channel, the button will plunge to “Team Messaging” which takes you to the Hack Chat.

You don’t have to look ahead to Friday, join Hack Chat any time you wish and view what the community is now debating.

Come Along Next Week Way too for KiCad!
Are you more of a KiCad man than an Eagle man? It is best to still head to this week to find out whether Matt changes your thinking. But wipe out your schedule next week when Wayne Stambaugh, among the list of lead developers of KiCad will join us for a Hack Chat on Friday, 1/20/17.

PCB Eagle 4 HeTPro: DRC y Gerber

Revisar errores con DRC y generar gerbers

TUTORIAL 3: https://www.youtube.com/watch?v=isDzLEy4nq0

HeTPro
www.hetpro.com.mx
https://hetpro-store.com/TUTORIALES/
contacto@hetpro.com.mx

Source

Eagle PCB Design With Matt Berggren

pcb-design

Eagle is a household reputation for more or less all Hackaday regulars. Right here is the time to find out more about impending features, have your ‘how do I do this in Eagle?’ questions addressed, and get your wishlist items heard. Come along on Friday at 12:00 PST for a realtime Hack Chat regarding the Eagle PCB Design computer software.

Hosting this week’s talk is Matt Berggren, best known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s purchase of Eagle last summer, the well-liked schematic design and PCB layout software falls under his purview. He has a thorough qualifications in designing printed circuit boards -if you can do it in EDA software package he knows how -this is an amazing chance to get addressed the questions that were stumping you.

Don’t skip this Hack Chat! Here’s a effortless web-based gadget to assist alter 1/13/17 at 12:00 PST to your local time.

Here’s How one can Engage:

Hack Chat are live community occurrences that happen in the Hackaday.io Hacker Channel. Look at that webpage (remember to be logged in) and search for the “Join this Project Button” in the top right. When you’re part of the Hacker Channel, that button will switch to “Team Messaging” that takes you to the Hack Chat.

You don’t have to await Friday, join Hack Chat at any time that suits you and look at what the community is currently preaching about.

Join Us Next Week Too for KiCad!
Are you more of a KiCad person than an Eagle person? You ought to still drop by this week to find out if Matt changes your opinions. But erase your calendar next week when Wayne Stambaugh, among the list of well-known developers of KiCad will show up for a Hack Chat on Friday, 1/20/17.

EAGLE Tutorial: Ground Planes with Polygons

Six simple steps to creating ground planes with a polygon pour in EAGLE. More information at: http://www.baldengineer.com/blog/2012/07/25/eagle-ground-plane-polygon-fills/

(Note: my blog use to be cmiyc.com, now it is baldengineer.com.)

Source

Eagle PCB Design With Matt Berggren

pcb-design

Eagle is a house-hold term for virtually all Hackaday regulars. This is your chance to study forthcoming features, have your ‘how do I do this in Eagle?’ questions clarified, and have your wishlist items heard. Come along on Friday at 12:00 PST for a actual time Hack Chat in relation to the Eagle PCB Design software package.

Hosting this week’s conversation is Matt Berggren, commonly known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s purchase of Eagle last summer, the trendy schematic design and PCB layout software falls under his grasp. He’s got a substantial experience in designing printed circuit boards -if you can do it in EDA software package he knows how -this is actually an incredible opportunity to get addressed the questions which have been stumping you.

Please do not skip out the Hack Chat! And here is a practical online application for helping switch 1/13/17 at 12:00 PST to your local time.

And here is The way to Engage In:

Hack Chat are live community events that happen in the Hackaday.io Hacker Channel. Have a look at that webpage (you should always be logged in) and find the “Join this Project Button” in the top right. Once you are associated with the Hacker Channel, that button will change to “Team Messaging” which brings you to the Hack Chat.

You don’t need to wait for Friday, join Hack Chat any time you prefer and check what the community is currently sharing.

Join Us Next Week As well for KiCad!
Are you even more of a KiCad person than an Eagle person? You should still head to this week to find out if Matt changes your mind. But filter out your schedule next week when Wayne Stambaugh, one of the lead developers of KiCad will come along for a Hack Chat on Friday, 1/20/17.