第43回インターネプコンジャパンー「MYDATA」のレーザー描画装置などのデモ

<マイクロニック・マイデータ・ジャパン株式会社>

ディスプレイ及び半導体用のフォトマスクを製造するレーザー描画装置及びプリント
基板製造装置の販売・保守サービス及び部品販売

http://www.micronic.se/www/main.nsf/content.xsp?action=openDocument&documentId=1FC15EFD98C9CF32C125778B0031B4E0&cat=C133&SessionID=D28VI1K15Y

source

Circuit Board Fabrication in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., founded on April 1, 2014 upon succeeding the whole Circuit Board business from AICA Kogyo Co., Ltd., provides the full solution for the Circuit Board products similar to pattern-designing, simulation for acquiring good high-speed signal quality and EMC, and Circuit Board production of varied quantities. Our expert consultation service is available as well for the analysis of electrical characteristics at an early stage of Circuit Board Development.

Our company name “RITA”(selected from the suggestions by our employees) represents the “Real Integrated Technology and Advisory” to represent our dedication to the technological excellence and the high level of services to our shoppers.

In December 2016, all the shares of RITA Electronics, Ltd. were duly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We look forward to tons of synergy effects from the vertical integration of Taishodo’s Electric Manufacturing Service and our Circuit Board products.

With thanks to the support from all our customers and partners, we performed our first 3 business years in success. We carry on and go after higher level of technologies to match our consumers’ criteria.

We are grateful for your constant support and encouragement!

Make Contact with Us

Telphone: 052-930-6151
Fax: 052-930-6157
Email Address: rp.deri@ritael.co.jp

Based on https://ritael.co.jp/english/

Yamamoto

Yamamoto‘s Circuit Board manufacturing area in China and japan give you a wide selection of support from preliminary prototype thru production – all facilities pay attention to high product mix in volume production across a range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Corporation History

Yamamoto Mfg. Ltd. launched in the year 1945 in the watchcase-metallurgy business and successfully built up this business in Japan, Korea, as well as China.

In the year 1968, Yamamoto parlayed their metallurgical and plating knowledge into Circuit Boards with an original plant in Tokorozawa Japan – Yamamoto’s initial venture into Circuit Boards was fueled by a large contract in 1968 with IBM Yasu Japan and development and research projects with a variety of primary Japanese OEM’s. One more Advanced Technology factory was started in Honjo Japan in 1985 and further Expanded in the year 2001. Yamamoto has also new Circuit Board facility in the Guangdong Province of China that began in 2008.

In Japan due to 2 Advanced Technology facilities and 2 Drill-Plating Support facilities with roughly 700K sq. ft. of manufacturing room in addition to our manufacturing area in China mainland, Yamamoto is well positioned to back up all Circuit Board technology levels across the globe without ever compromising quality.

E-mail us
sales@yusa.com

Based on http://yusa.com/

ミッツ社のプリント基板加工機による加工の様子

これは私が個人で所有しているミッツ(MITS)社のプリント基板加工機による加工の様子を撮影した動画です。かなり古い機種なのですが、ご覧のようにプリント基板の試作で機動性を発揮してくれています。
http://www.neo-tech-lab.co.uk

source

PCB Board Fab in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., founded on Apr 1, 2014 upon succeeding the complete Circuit Board business from AICA Kogyo Co., Ltd., provides the full solution for the Circuit Board products like pattern-designing, simulation for obtaining good high-speed signal quality and EMC, and Circuit Board production of different quantities. Our professional consultation service is made available for the analysis of electrical characteristics at an early stage of Circuit Board Development.

Our corporation name “RITA”(chosen from the suggestions by our personnel) represents the “Real Integrated Technology and Advisory” to represent our promise to the technological perfection and the high level of services to our consumers.

In Dec 2016, all of the shares of RITA Electronics, Ltd. were properly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We expect a great many synergy effects from the vertical integration of Taishodo’s Electronic Manufacturing Service and our Circuit Board products.

Due to the support from all our customers and partners, we performed our first 3 business years in success. We continue to run after much higher level of technologies to fulfill our consumers’ criteria.

We are grateful for your continuing support and trust!

Get in Touch with Us

Telphone: 052-930-6151
Telefax: 052-930-6157
Mailbox: rp.deri@ritael.co.jp

Dependent on https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s PCB Board manufacturing facilities in China and japan supply a great number of support from starting prototype to production – all production sites aim for high product mix in volume production across a range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Enterprise Story

Yamamoto Mfg. Ltd. started in the year 1945 in the watchcase-metallurgy business and successfully built this business in Japan, Korea, and China.

In the year 1968, Yamamoto parlayed their metallurgical and plating practical experience into PCB Boards with an preliminary plant in Tokorozawa Japan – Yamamoto’s initial foray into PCB Boards was motivated by a massive contract in 1968 with IBM Yasu Japan and development and research projects with some top notch Japanese OEM’s. An added Advanced Technology manufacturing unit was began in Honjo Japan in 1985 and additionally Expanded in the year 2001. Yamamoto also has new PCB Board manufacturing area in the Guangdong Province of China which opened in 2008.

In Japan by way of 2 Advanced Technology industrial facilities and 2 Drill-Plating Support facilities with over 700K sq. ft. of manufacturing room as well as our factory in China mainland, Yamamoto is well positioned to back up all PCB Board technology levels all over the globe without ever sacrificing level of quality.

Write to us
sales@yusa.com

Dependent on http://www.yusa.com/

PCBデザインチェック.wmv

PCBデザインチェックのご紹介。
PCBデザインチェックは、基板設計のデータを、専用CADを必要とすることなく、確認やパターン間の間隔などを簡単に検証できる検証専用ソフトウェアです。 ガーバーデータにNCデータを加え、さらにマウントデータなどを取り込み、各社CAD製造データからCAD設計検証が可能になります。

source

Circuit Card Fabricating in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., founded on Apr 1, 2014 upon succeeding the entire Circuit Board business from AICA Kogyo Co., Ltd., delivers the full solution for the Circuit Board products that include pattern-designing, simulation for getting good high-speed signal quality and EMC, and Circuit Board manufacturing of different quantities. Our expert consulting service is available too for the analysis of electrical characteristics at an early phase of Circuit Board Development.

Our corporation name “RITA”(selected from the thoughts by our team) means the “Real Integrated Technology and Advisory” to represent our promise to the technical brilliance and the high standard of services to our shoppers.

In Dec 2016, all the shares of RITA Electronics, Ltd. were properly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We are expecting a great many synergy effects from the vertical incorporation of Taishodo’s Electric Manufacturing Service and our Circuit Board products.

Because of the support from all our buyers and business partners, we performed our first 3 business years in success. We continue to pursue much higher level of technologies to comply with our customers’ criteria.

We appreciate your constant support and encouragement!

Find Us

Telphone: 052-930-6151
Facsimile: 052-930-6157
Inbox: rp.deri@ritael.co.jp

In keeping with https://ritael.co.jp/english/

Yamamoto

Yamamoto‘s Circuit Card manufacturing facilities in Japan and China give you a number of support from very first prototype to production – all factories direct attention to high product mix in volume production across a range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Firm Overview

Yamamoto Mfg. Ltd. commenced in 1945 in the watchcase-metallurgy business and successfully created this business in Japan, Korea, and also China.

In 1968, Yamamoto parlayed their metallurgical and plating specialist knowledge into Circuit Cards with an original factory in Tokorozawa Japan – Yamamoto’s initial venture into Circuit Cards was fueled by a large contract in 1968 with IBM Yasu Japan and development and research projects with a couple of top rated Japanese OEM’s. A further Advanced Technology facility was established in Honjo Japan in 1985 and additionally Expanded in 2001. Yamamoto has additionally new Circuit Card manufacturing unit in the Guangdong Province of China which launched in 2008.

In Japan due to two Advanced Technology facilities and two Drill-Plating Support facilities with over 700K sq. ft. of manufacturing space as well as our factory in China mainland, Yamamoto is well positioned to support all Circuit Card technology levels throughout the world without ever decreasing quality.

E-mail us
sales@yusa.com

In keeping with http://yusa.com/

樹脂間紙クリーナーデモ用_0002.wmv

樹脂間紙専用のクリーナーです。
プリント基板の製造工場などで使うPPシート(合紙)の品質管理に最適です。
特許申請中です。

source

PCB Fabricating in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., founded on Apr 1, 2014 upon succeeding the entire Printed Wiring Board business from AICA Kogyo Co., Ltd., provides the comprehensive solution for the Printed Wiring Board products including pattern-designing, simulation for attaining good high-speed signal quality and EMC, and Printed Wiring Board manufacture of varied quantities. Our specialist consulting service is made available for the analysis of electrical characteristics at an early stage of Printed Wiring Board Development.

Our business name “RITA”(selected from the ideas by our team) represents the “Real Integrated Technology and Advisory” to symbolize our dedication to the technological flawlessness and the high quality of services to our customers.

In Dec 2016, all of the shares of RITA Electronics, Ltd. were duly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We expect to see tons of synergy effects from the vertical incorporation of Taishodo’s Electronics Manufacturing Service and our Printed Wiring Board products.

With thanks to the support from all of our customers and business partners, we performed our first three business years in success. We will continue to run after higher level of technologies to comply with our shoppers’ need.

We a thankful for your long-term support and trust!

Communicate with Us

Telphone: 052-930-6151
Fax: 052-930-6157
Inbox: rp.deri@ritael.co.jp

Dependent upon https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s PCB production lines in China and japan offer a number of support from initial prototype thru production – all facilities give full attention to high product mix in volume production across a number of technologies from the industry-common to the next-generation challenges.

Yamamoto. Corporation Story

Yamamoto Mfg. Ltd. originated in 1945 in the watchcase-metallurgy business and successfully set up this business in Japan, Korea, as well as China.

In 1968, Yamamoto parlayed their metallurgical and plating experience into PCBs with an first plant in Tokorozawa Japan – Yamamoto’s initial venture into PCBs was fueled by a big contract in 1968 with IBM Yasu Japan and research and development projects with a variety of prominent Japanese OEM’s. One more Advanced Technology manufacturing plant was established in Honjo Japan in 1985 and furthermore Expanded in 2001. Yamamoto has new PCB manufacturing unit in the Guangdong Province of China that established in 2008.

In Japan by means of 2 Advanced Technology facilities and 2 Drill-Plating Support facilities with in excess of 700K sq. ft. of manufacturing room along with our factory in China mainland, Yamamoto is well positioned to back up all PCB technology levels worldwide without ever bringing down quality.

Make contact
sales@yusa.com

Dependent upon http://www.yusa.com/

大型プリント基板のエッチング

(株)プリント電子研究所が所有する大型プリント基板用特殊エッチング装置の動作する様子です。
詳細はhttp://www.pdk21.com/を御覧ください。

source

PCB Manufacture in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., started on April 1, 2014 upon succeeding the entire Printed Circuit business from AICA Kogyo Co., Ltd., delivers the overall solution for the Printed Circuit products just like pattern-designing, simulation for attaining good high-speed signal quality and EMC, and Printed Circuit manufacturing of varied quantities. Our professional consultation service is available too for the analysis of electrical characteristics at an early period of Printed Circuit Development.

Our business name “RITA”(chosen from the thoughts by our office staff) is short for the “Real Integrated Technology and Advisory” to stand for our promise to the technical brilliance and the high quality of services to our buyers.

In Dec 2016, all of the shares of RITA Electronics, Ltd. were duly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We are expecting loads of synergy effects from the vertical incorporation of Taishodo’s Electric Manufacturing Service and our Printed Circuit products.

Because of the support from all our clients and business partners, we performed our first 3 business years in success. We continue to go after higher level of technologies to comply with our clients’ criteria.

We are grateful for your continuing support and trust!

Reach Us

Telphone: 052-930-6151
Facsimile: 052-930-6157
Email Address: rp.deri@ritael.co.jp

Determined by https://ritael.co.jp/english/

Yamamoto

Yamamoto‘s PCB manufacturing area in China and japan give you a wide range of support from very first prototype through production – all facilities give full attention to high product mix in volume production across a number of technologies from the industry-common to the next-generation challenges.

Yamamoto. Enterprise History

Yamamoto Mfg. Ltd. started in the year 1945 in the watchcase-metallurgy business and successfully built this business in Japan, Korea, and China.

In the year 1968, Yamamoto parlayed their metallurgical and plating specialist knowledge into PCBs with an initial facility in Tokorozawa Japan – Yamamoto’s initial foray into PCBs was motivated by a significant contract in 1968 with IBM Yasu Japan and research and development projects with multiple primary Japanese OEM’s. An added Advanced Technology facility was established in Honjo Japan in 1985 and furthermore Expanded in the year 2001. Yamamoto likewise has new PCB plant in the Guangdong Province of China that launched in 2008.

In Japan with 2 Advanced Technology facilities and 2 Drill-Plating Support facilities with over 700K sq. ft. of manufacturing space together with our manufacturing Facility in China Dongguan, Yamamoto is well positioned to support all PCB technology levels globally without ever giving up quality.

Contact us today
sales@yusa.com

Determined by http://yusa.com/

基板実装 マウンター

クリームはんだを印刷した基板上に表面実装部品を自動で実装していきます。

エンジニアのための情報サイト 電子機器製造ドットコム
http://www.denshikikiseizou.com

source

Printed Circuit Board Manufacturing in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., established on Apr 1, 2014 upon succeeding the entire PCB Board business from AICA Kogyo Co., Ltd., delivers the total solution for the PCB Board products which include pattern-designing, simulation for attaining good high-speed signal quality and EMC, and PCB Board manufacture of varied quantities. Our professional consultation service is available for the analysis of electrical characteristics at an early period of PCB Board Development.

Our company name “RITA”(chosen from the options by our staff members) represents the “Real Integrated Technology and Advisory” to signify our dedication to the technical perfection and the high standard of services to our clients.

In Dec 2016, all the shares of RITA Electronics, Ltd. were duly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We are expecting a lot of collaboration effects from the vertical incorporation of Taishodo’s Electronic Manufacturing Service and our PCB Board products.

Thanks to the support from all of our clients and partners, we performed our first three business years in success. We continue to chase higher level of technologies to match our buyers’ demand.

We are grateful for your continuing support and trust!

Reach Us

TEL: 052-930-6151
Fax: 052-930-6157
Email: rp.deri@ritael.co.jp

Determined by https://ritael.co.jp/english/

Yamamoto

Yamamoto‘s Printed Circuit Board factories in China and japan present you with a massive amount of support from very first prototype through production – all facilities pay attention to high product mix in volume production across a wide array of technologies from the industry-common to the next-generation challenges.

Yamamoto. Enterprise Story

Yamamoto Mfg. Ltd. commenced in 1945 in the watchcase-metallurgy business and successfully built this business in Japan, Korea, plus China.

In 1968, Yamamoto parlayed their metallurgical and plating experience into Printed Circuit Boards with an very first facility in Tokorozawa Japan – Yamamoto’s initial foray into Printed Circuit Boards was motivated by a massive contract in 1968 with IBM Yasu Japan and development and research projects with a couple of top notch Japanese OEM’s. A second Advanced Technology manufacturing unit was began in Honjo Japan in 1985 and additionally Expanded in 2001. Yamamoto has additionally new Printed Circuit Board manufacturing unit in the Guangdong Province of China which launched in 2008.

In Japan with the help of two Advanced Technology facilities and two Drill-Plating Support facilities with above 700K sq. ft. of manufacturing room together with our production line in China Dongguan, Yamamoto is well positioned to support all Printed Circuit Board technology levels all over the world without ever limiting quality.

Contact us today
sales@yusa.com

Determined by http://yusa.com/

テクニカルショウヨコハマ2014 テクニカルサポート 多列電動プリント基盤分割機 静岡県産業振興財団

テクニカルショウヨコハマ2014 テクニカルサポート 浜松市細江町中川テクノランド7000-71
 http://www.t-support.co.jp/ テクニカルサポートが開発した多列電動プリント基盤分割機は、従来手動で行っていた基盤の分割時のリスクを解決しました。特許出願中。インラインで使用でき製造行程や作業時間を大幅に短縮できる上に完成品の仕上がりを均一化できます。
トラヤテレビサービス株式会社 http://www.e-toraya.jp/ホームページ制作、SEO対策、ソーシャル活用、Wordpress制作、新規顧客開拓のホームページ作成、コンテンツ作成、動画撮影代行、動画編集、コラム、コピーライティング、ウェブコンサルティング、Youtube、
創企画舎 イベント企画 静岡、タレントブッキング、お笑い、ものまね、大道芸人、司会者、榎戸真弓

source

PCB Board Manufacture in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., established on Apr 1, 2014 upon succeeding the entire PCB business from AICA Kogyo Co., Ltd., delivers the comprehensive solution for the PCB products for example, pattern-designing, simulation for attaining good high-speed signal quality and EMC, and PCB production of varied quantities. Our professional consultation service is available as well for the analysis of electrical characteristics at an early period of PCB Development.

Our company name “RITA”(selected from the options by our office staff) stands for the “Real Integrated Technology and Advisory” to represent our promise to the technical perfection and the high level of services to our shoppers.

In Dec 2016, all of the shares of RITA Electronics, Ltd. were appropriately transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We expect to see loads of collaboration effects from the vertical integration of Taishodo’s Electric Manufacturing Service and our PCB products.

Thanks to the support from all of our buyers and business partners, we performed our first three business years in success. We carry on and go after higher level of technologies to comply with our consumers’ requirement.

We are grateful for your continuing support and encouragement!

Speak to Us

Contact Tel: 052-930-6151
Fax: 052-930-6157
E-mail: rp.deri@ritael.co.jp

Derived from https://ritael.co.jp/english/

Yamamoto

Yamamoto‘s PCB Board manufacturing units in China and japan supply a great deal of support from original prototype through production – all production sites give full attention to high product mix in volume production across a lot of technologies from the industry-common to the next-generation challenges.

Yamamoto. Corporation Overview

Yamamoto Mfg. Ltd. originated in the year 1945 in the watchcase-metallurgy business and successfully built this business in Japan, Korea, and additionally China.

In the year 1968, Yamamoto parlayed their metallurgical and plating working experience into PCB Boards with an original facility in Tokorozawa Japan – Yamamoto’s initial foray into PCB Boards was motivated by a big contract in 1968 with IBM Yasu Japan and development and research projects with several prominent Japanese OEM’s. Yet another Advanced Technology manufacturing area was started in Honjo Japan in 1985 and furthermore Expanded in the year 2001. Yamamoto has also new PCB Board manufacturing facility in the Guangdong Province of China that began in 2008.

In Japan with 2 Advanced Technology production facilities and 2 Drill-Plating Support facilities with over 700K sq. ft. of manufacturing room along with our manufacturing area in China Dongguan, Yamamoto is well positioned to back up all PCB Board technology levels globally without ever limiting craftsmanship.

E-mail us
sales@yusa.com

Derived from http://yusa.com/

【CADLUS Xの操作】 08 打抜線入力

プリント基板のネット通販なら、ピーバンドットコム!
http://www.p-ban.com/
製造イニシャル無料で、設計から実装までコスト大幅ダウン!
1枚から製造、量産もOK、全国翌日着出荷。

source

PCB Fabricating in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., established on Apr 1, 2014 upon succeeding the entire Printed Circuit business from AICA Kogyo Co., Ltd., provides the over-all solution for the Printed Circuit products such as pattern-designing, simulation for getting good high-speed signal quality and EMC, and Printed Circuit manufacture of varied quantities. Our expert consulting service is available for the analysis of electrical characteristics at an early stage of Printed Circuit Development.

Our corporate name “RITA”(selected from the options by our office staff) signifies the “Real Integrated Technology and Advisory” to signify our persistence to the technological superiority and the high quality of services to our buyers.

In December 2016, all the shares of RITA Electronics, Ltd. were appropriately transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We expect a variety of collaboration effects from the vertical integration of Taishodo’s Electronics Manufacturing Service and our Printed Circuit products.

Due to the support from all of our customers and partners, we performed our first 3 business years in success. We carry on and pursue higher level of technologies to meet our consumers’ criteria.

We appreciate your continuing support and trust!

Communicate with Us

Telephone Number: 052-930-6151
Telefax: 052-930-6157
Mailbox: rp.deri@ritael.co.jp

According to https://ritael.co.jp/english/

Yamamoto

Yamamoto‘s PCB manufacturing area in China and japan offer a wide variety of support from starting prototype thru production – all production sites give attention to high product mix in volume production across a range of technologies from the industry-common to the next-generation challenges.

Yamamoto. Firm Profile

Yamamoto Mfg. Ltd. began in 1945 in the watchcase-metallurgy business and successfully established this business in Japan, Korea, and additionally China.

In 1968, Yamamoto parlayed their metallurgical and plating specialist knowledge into PCBs with an preliminary facility in Tokorozawa Japan – Yamamoto’s initial foray into PCBs was supported by a large contract in 1968 with IBM Yasu Japan and development and research projects with a few top Japanese OEM’s. A supplementary Advanced Technology manufacturing unit was launched in Honjo Japan in 1985 and further Expanded in 2001. Yamamoto also has new PCB facility in the Guangdong Province of China which established in 2008.

In Japan with the help of 2 Advanced Technology industrial facilities and 2 Drill-Plating Support facilities with above 700K sq. ft. of manufacturing room in addition to our manufacturing Facility in China Dongguan, Yamamoto is well positioned to back up all PCB technology levels worldwide without ever lowering craftsmanship.

Contact us today
sales@yusa.com

According to http://yusa.com/

3分でわかるQuadcept

クアッドセプトは、高機能で低価格な回路図エディタ、PCB設計ツールです。
初期費用、更新費用ともに「0円」なのが特徴です。
「クラウド化」「低コスト」「現場の声で進化」「イノベーション」でという4
つのコンセプトで、グローバルでの設計、開発業務の効率化を行い、より良い
サービス提供を行っています。

[Schematic/Circuit Editor] [PCB Designer/3D] [回路図エディタ][プリント基板][プリント基板製造][プリント基板設計]

■ Quadceptのダウンロードはこちら
https://www.quadcept.com/ja/index.html

———————————–
♡ Quadcept
https://www.quadcept.com/

♡ 完全無償のネット変換/照合サービス【NET CHANGER】
https://netlist.quadcept.com/
♡ Blog
http://blog.quadcept.com/
♡ FACEBOOK
https://www.facebook.com/quadcept
♡ TWITTER

————————————————————–

★ これまでの動画一覧
https://www.youtube.com/channel/UCjPl15UJ0-WVfPkmSsORJrw

————————————————————–

■製品概要
https://www.quadcept.com/ja/product/index.html

■サポートトップ
 http://www.quadcept.com/ja/faq/

■フォーラムサイト
http://forum.quadcept.com/

■オンラインマニュアル
http://www.quadcept.com/ja/manual

■Youtube Quadcept
 http://www.youtube.com/user/QuadceptManual

■チュートリアルマニュアルダウンロード先
http://www.quadcept.com/ja/manual/download/latest/

circuit editor,Schematic,cloud,PCB,3D,CAD,Maker,Electronics,
Industry4.0, Techshop,fablab,PCB Manufacturing,Layout,Mount,
BOM,parts library,Symbol,Footprint,Digi-Key,RS,Chip1stop,Subscription,
Pay as you go,

source

Printed Circuit Board Manufacture in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., established on Apr 1, 2014 upon succeeding the whole PCB Board business from AICA Kogyo Co., Ltd., provides the complete solution for the PCB Board products such as pattern-designing, simulation for getting good high-speed signal quality and EMC, and PCB Board manufacture of various quantities. Our specialist consultation service is made available for the analysis of electrical characteristics at an beginning phase of PCB Board Development.

Our business name “RITA”(picked from the ideas by our workers) signifies the “Real Integrated Technology and Advisory” to signify our dedication to the technological superiority and the high standard of services to our consumers.

In December 2016, all of the shares of RITA Electronics, Ltd. were appropriately transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We look forward to scores of synergy effects from the vertical integration of Taishodo’s Electronic Manufacturing Service and our PCB Board products.

Thanks to the support from all our customers and partners, we performed our first 3 business years in success. We continue to pursue much higher level of technologies to comply with our clients’ criteria.

We are grateful for your constant support and encouragement!

Reach Out to Us

TEL: 052-930-6151
Telefax: 052-930-6157
Email: rp.deri@ritael.co.jp

Using https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s Printed Circuit Board manufacturing area in Japan and China present you with a wide variety of support from very first prototype to production – all factories aim for high product mix in volume production across various technologies from the industry-common to the next-generation challenges.

Yamamoto. Company Overview

Yamamoto Mfg. Ltd. commenced in 1945 in the watchcase-metallurgy business and successfully established this business in Japan, Korea, as well as China.

In 1968, Yamamoto parlayed their metallurgical and plating working experience into Printed Circuit Boards with an initial plant in Tokorozawa Japan – Yamamoto’s initial foray into Printed Circuit Boards was supported by a significant contract in 1968 with IBM Yasu Japan and research and development projects with some foremost Japanese OEM’s. A further Advanced Technology facility was launched in Honjo Japan in 1985 and additionally Expanded in 2001. Yamamoto has also new Printed Circuit Board factory in the Guangdong Province of China that opened in 2008.

In Japan by means of two Advanced Technology manufacturing facilities and two Drill-Plating Support facilities with around 700K sq. ft. of manufacturing space in addition to our production line in China Dongguan, Yamamoto is well positioned to back up all Printed Circuit Board technology levels all over the globe without ever bringing down quality.

E-mail us
sales@yusa.com

Using http://www.yusa.com/

【CADLUS Xの操作】 07 結線線幅登録

プリント基板のネット通販なら、ピーバンドットコム!
http://www.p-ban.com/
製造イニシャル無料で、設計から実装までコスト大幅ダウン!
1枚から製造、量産もOK、全国翌日着出荷。

source

Circuit Card Manufacture in Japan

RITA Electronics, Ltd

RITA Electronics, Ltd., established on April 1, 2014 upon succeeding the entire Printed Circuit business from AICA Kogyo Co., Ltd., offers the complete solution for the Printed Circuit products similar to pattern-designing, simulation for getting good high-speed signal quality and EMC, and Printed Circuit manufacturing of various quantities. Our specialist consulting service is available too for the analysis of electrical characteristics at an early phase of Printed Circuit Development.

Our corporation name “RITA”(selected from the thoughts by our team members) symbolizes the “Real Integrated Technology and Advisory” to represent our dedication to the technological flawlessness and the high level of services to our customers.

In December 2016, all the shares of RITA Electronics, Ltd. were properly transferred to Taishodo Corporation (Toyokawa, Aichi Prefecture). We anticipate a great many collaboration effects from the vertical incorporation of Taishodo’s Electric Manufacturing Service and our Printed Circuit products.

Due to the support from all our buyers and business partners, we performed our first three business years in success. We always pursue much higher level of technologies to comply with our customers’ need.

We are grateful for your continued support and trust!

Speak to Us

Contact Tel: 052-930-6151
Fax: 052-930-6157
Inbox: rp.deri@ritael.co.jp

In accordance with https://www.ritael.co.jp/english/

Yamamoto

Yamamoto‘s Circuit Card production lines in China and japan provide a large amount of support from initial prototype thru production – all production sites specialize in high product mix in volume production across a number of technologies from the industry-common to the next-generation challenges.

Yamamoto. Firm Story

Yamamoto Mfg. Ltd. originated in 1945 in the watchcase-metallurgy business and successfully built up this business in Japan, Korea, and additionally China.

In 1968, Yamamoto parlayed their metallurgical and plating experience into Circuit Cards with an very first facility in Tokorozawa Japan – Yamamoto’s initial venture into Circuit Cards was supported by a massive contract in 1968 with IBM Yasu Japan and development and research projects with a few very best Japanese OEM’s. A different Advanced Technology factory was established in Honjo Japan in 1985 and furthermore Expanded in 2001. Yamamoto in addition has new Circuit Card factory in the Guangdong Province of China that began in 2008.

In Japan because of two Advanced Technology factories and two Drill-Plating Support facilities with above 700K sq. ft. of manufacturing area as well as our manufacturing area in China mainland, Yamamoto is well positioned to support all Circuit Card technology levels throughout the world without ever sacrificing quality.

Contact us today
sales@yusa.com

In accordance with http://www.yusa.com/