- Place of Origin:
Jiangsu, China (Mainland)
- Brand Name:
- Model Number:
- Conductor Material:
- Insulation Material:
- Number of Conductors:
- Low PIM:
Less than -155dBc
- Good VSWR:
Less than 1.10@(0-3GHz)
- Matched cable:
- Body plating:
- Pin plating:
- Packing method:
- Temperature range:
- Frequency range:
- Set/Sets per Week Normally lead time of jumper cable is 10 days.
- Packaging Details
- 1piece per plastic bag; 10-15pcs per carton.
Carton dimension: 47*55*54 cm3/55*54*13cm3
Special packing methods, like in pallet, are available.
- Shanghai, Qingdao, Ningbo, Tianjin, Shenzhen, Guangzhou.
- within 10 days after payment
Jumper Cable RF-Combination connectors of different connector series can be assembled as either straight or angle versions by using the corresponding clamps.With only one combination connector and the different cable clamps,a variety of connectors can be produced allowing a reduction in stock-levels.The technical specifications can be obtained from the descriptions in the respective chapters for each series.
Note: connector and cable type,length an be changed based on customer’s requirements.
Item No.: N-C-J7a/N-C-K400–0.2m
|According to||IEC 60169-4 IEC 60169-16|
|4||Dielectric withstanding voltage||≥2500RMS,50Hz,at sea level|
|6||Contact Resistance||Outer Contact≤1.0mΩ ;Center Contact≤1.0mΩ|
|1||Durability||Mating cycles ≥500|
Material and plating