SkyNews: Technology Helping The Developing World

SkyNews Technofile podcast (Episode 50) compares the approaches of OLPC, Aleutia, and NComputing. Interviews with Negroponte, Rosenberg, and Shah.

source

Windows 10 desktop on the Raspberry Pi: NComputing releases $99 RX300 Computer

Official introduction: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client is going to be for sale to firms from the end of this month.

A thin client is a lightweight personal computer that is purpose-built for remoting into a server (generally cloud or desktop virtualization environments). It is dependent strongly upon a second computer (its server) to meet up with its computational functions. This is not the same as a typical desktop computer (fat client), which is a PC built to do these jobs by itself. The specific roles assumed by the server are vastly different, from hosting a shared set of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has launched a Windows thin client built around the $35, bank card-sized Raspberry Pi 3 Model B.

The RX300 tiny computer gives access to many Windows desktops, for instance, Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization program.

The software allows firms to supply a centrally controlled Windows desktop to many hundreds of RX300 clients.

NComputing guarantees its vCAST streaming technology enables full-screen replay of 1080p full HD local or web based video on the clients, without the demand for the central servers to use a dedicated graphics processing unit. On the other hand, registration to this vCast technology is only bundled for six months after purchasing the RX300.

Each and every thin client has 4 USB v 2.0 ports, with full USB re-direction and server-side device drivers to allow support for a wide range of peripherals.

The $99 RX300, which is created for schools and small middle businesses, can be run as a thin client to access a virtual Windows desktop or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian Operating system.

NComputing states that the thin clients are built to be easy to manage and receive updates from vSpace Pro 10 servers on auto-pilot.

Young Song, NComputing chief executive officer, explained he opted to base the client around the Raspberry Pi 3 because of the board’s cost-effectiveness and flexibility.

Each individual RX300 is available bundled with a free twelve months connection license to vSpace Pro 10, with each subsequent year costing $49 each consumer.

NComputing’s vSpace Pro 10 can stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or perhaps Windows Server. To stream a desktop to multiple clients, vSpace Pro 10 should be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the firm must also spend money on the correct Microsoft client access licenses.

The NComputing RX300 series is going to be obtainable around the globe in late February via merchants.

The RX300 isn’t the very first thin client to be released founded on the best rated Raspberry Pi. During the past year Citrix and ViewSonic launched the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Benefits Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

How to use Remote Desktop Connection

http://jakewright.net – Remote Desktop Connection lets you remotely control a Windows machine from a PC or Mac from anywhere in the world, for free. In this tutorial, I will show you how to set it up and get it working.

source

Windows 10 desktop computer on the Raspberry Pi: NComputing unveils $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be available to firms from the end of this month.

A thin client is a lightweight computer that is purpose-built for remoting into a server (in most cases cloud or desktop virtualization environments). It is dependent seriously upon a second computer (its server) to satisfy its computational roles. This is not the same as a regular desktop PC (fat client), which is a PC built to take on these tasks independently. The specific roles assumed by the server could vary, from hosting a shared set of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has announced a Windows thin client built around the $35, mastercard-sized Raspberry Pi 3 Model B.

The RX300 thin client provides entry to an assortment of Windows desktops, which include Windows 10, which are streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software program.

The software allows firms to provision a centrally managed Windows desktop to 100s of RX300 clients.

NComputing says its vCAST streaming technology enables full-screen video playback of full HD local or web-based video on the clients, without the necessity for the central servers to possess a top notch GPU. Nevertheless, registration to this vCast technology is only provided for six months time after purchasing the RX300.

Every single thin client has 4 USB v 2.0 ports, with full USB redirection and server-side device drivers for the provision of support for a collection of peripherals.

The $99 RX300, which is geared towards schools and small middle enterprises, can be run as a thin client to access a virtual Windows computer or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian OS.

NComputing declares the thin clients are designed to be easy to configure and receive updates from vSpace Pro 10 servers routinely.

Young Song, NComputing CEO, stated he decided to base the client around the Raspberry Pi 3 as a consequence of board’s value for money and transportability.

Each and every RX300 arrives along with a free one year connection license to vSpace Pro 10, with each subsequent year priced at $49 for every consumer.

NComputing’s vSpace Pro 10 can easily stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or possibly Windows Server. To stream a desktop to several clients, vSpace Pro 10 ought to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the corporation will also need to pay for the appropriate Microsoft client access licenses.

The NComputing RX300 series will be on the market all around the world in late February thru merchants.

The RX300 is not the 1st thin client to be released founded on the best-selling Raspberry Pi. In 2016 Citrix and ViewSonic presented the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Functions Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Thin Client Setup

Learn how to setup a ThinManager enabled thin client.

source

Windows 10 personal computer on the Raspberry Pi: NComputing introduces $99 RX300 Computer

Official introduction: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client is going to be offered to firms from the end of this month.

A thin client is a lightweight desktop PC that is purpose-built for remote entry to a server (commonly cloud or desktop virtualization environments). It is dependent a great deal upon an additional computer (its server) in order to reach its computational jobs. This is distinctive from a regular desktop PC (fat client), which is a PC built to take on these roles independently. The specific roles assumed by the server can vary, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has presented a Windows thin client built around the $35, debit card-dimension Raspberry Pi 3 Model B.

The RX300 thin client gives access to various Windows desktops, such as Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to provision a centrally controlled Windows desktop to 100s of RX300 clients.

NComputing claims its vCAST streaming technology allows for full-screen play-back of 1080p full HD local or web based video on the clients, without needing the central servers to own a superior graphics processing unit. Still, subscription to this vCast technology is just incorporated for 6 months after paying for the RX300.

Every thin client has 4 USB version 2.0 ports, with full USB re-direction and server-side device drivers for the provision of support for a range of peripheral devices.

The $99 RX300, which is designed for educational facilities and SMBs, can be run as a thin client to gain access to a virtual Windows computer or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian Operating system.

NComputing states that the thin clients are built to be simple to manage and receive updates from vSpace Pro 10 servers completely by itself.

Young Song, NComputing CEO, said he made a decision to base the client around the Raspberry Pi 3 because of board’s cost-effectiveness and transportability.

Each individual RX300 arrives bundled with a cost-free 12 months connection license to vSpace Pro 10, with each subsequent year priced at $49 every customer.

NComputing’s vSpace Pro 10 has the power to stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or even Windows Server. To stream a desktop to different clients, vSpace Pro 10 is required to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the company will also need to purchase the correct Microsoft client access licenses.

The NComputing RX300 series is going to be for sale around the globe in late February thru merchants.

The RX300 is not the very first thin client to be launched based on the best-selling Raspberry Pi. A year ago Citrix and ViewSonic released the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Functions Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Installing & Configuring Active Directory – Windows Server 2008 R2

This video is a step by step guide demonstrating how to install and configure Active Directory Domain Services (ADDS) with Windows Server 2008 R2 to create a Domain Controller. A Domain Controller allows a network to be managed centrally from a single secure location.

source

Windows 10 desktop computer on the Raspberry Pi: NComputing launches $99 RX300 Computer

Official introduction: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client is going to be for sale to firms from the end of this month.

A thin client is a light-weight personal computer that is purpose-built for remoting into a server (normally cloud or desktop virtualization environments). It depends greatly on another computer (its server) to fulfill its computational roles. This is distinct from a conventional desktop computer (fat client), which is a computer built to tackle these roles without help. The specific roles assumed by the server are vastly different, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has released a Windows OS thin client built on the $35, debit card-scale Raspberry Pi 3 Model B.

The RX300 tiny computer allows for entry to an assortment of Windows desktops, which include Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization program.

The software allows firms to provide a centrally controlled Windows desktop to many hundreds of RX300 clients.

NComputing promises its vCAST streaming technology makes it possible for full-screen playback of 1080p full HD local or on-line video on the clients, without the need for the central servers to have a superior GPU. Still, membership to this vCast technology is just included for six months time after buying the RX300.

Each thin client has four USB v 2.0 ports, with full USB re-direction and server-side device drivers to make available support for a number of peripherals.

The $99 RX300, which is targeted at schools and small middle enterprises, can be run as a thin client to access a virtual Windows desktop or as a local Raspberry Pi PC, running the Pi’s official Linux-based Raspbian Operating-system.

NComputing states that the thin clients are built to be basic to manage and receive updates from vSpace Pro 10 servers auto-magically.

Young Song, NComputing CEO, said he made a decision to base the client around the Raspberry Pi 3 because of board’s affordability and flexibility.

Every single RX300 is available bundled with a cost-free one year connection license to vSpace Pro 10, with each subsequent year costing $49 for every consumer.

NComputing’s vSpace Pro 10 is able to stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or perhaps Windows Server. To stream a desktop to various clients, vSpace Pro 10 ought to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the corporation must also purchase the appropriate Microsoft client access licenses.

The NComputing RX300 series is going to be available to buy throughout the world in late February through merchants.

The RX300 is not the very first thin client to be introduced based upon the top rated Raspberry Pi. During the past year Citrix and ViewSonic released the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Benefits Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

HP Thin Clients Explained

Matthew Stibbe explains the latest HP Thin Client solutions for your business.

source

Windows 10 desktop on the Raspberry Pi: NComputing rolls out $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client is going to be available to firms from the end of this month.

A thin client is a lightweight personal computer that is purpose-built for remote access to a server (usually cloud or desktop virtualization environments). It relies very much upon an additional computer (its server) to meet up with its computational tasks. This is unlike a conventional desktop computer (fat client), which is a computer made to take on these tasks independently. The specific roles assumed by the server can vary greatly, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has introduced a Windows thin client built upon the $35, bank card-measurement Raspberry Pi 3 Model B.

The RX300 tiny computer delivers entry to a variety of Windows desktops, for instance, Windows 10, which are streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to supply a centrally manipulated Windows desktop to 100s of RX300 clients.

NComputing guarantees its vCAST streaming technology allows for full-screen play-back of full HD local or on-line video on the clients, without the necessity for the central servers to have a top quality GPU. Having said that, subscription to this vCast technology is just bundled for half a year after paying for the RX300.

Each and every thin client has 4 USB version 2.0 ports, with full USB re-direction and server-end device drivers to present support for a selection of peripheral devices.

The $99 RX300, which is created for educational institutions and small middle enterprises, can be run as a thin client to get into a virtual Windows desktop or as a local Raspberry Pi PC, running the Pi’s official Linux-based Raspbian Operating system.

NComputing says the thin clients are intended to be effortless to set up and receive updates from vSpace Pro 10 servers auto-magically.

Young Song, NComputing chief executive officer, mentioned he opted to base the client around the Raspberry Pi 3 because of the board’s cost-effectiveness and transferability.

Each and every RX300 unfolds included with a cost-free twelve months connection license to vSpace Pro 10, with each subsequent year pricing $49 every customer.

NComputing’s vSpace Pro 10 can easily stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or even Windows Server. To stream a desktop to various clients, vSpace Pro 10 is required to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the corporation must also buy the proper Microsoft client access licenses.

The NComputing RX300 series is going to be available in the market all over the globe in late February thru resellers.

The RX300 isn’t the very first thin client to be released based upon the best-selling Raspberry Pi. During the past year Citrix and ViewSonic introduced the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Functions Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

How to Join Client to a Active Directory Domain in Windows Server 2012

Joining a machine to a Active Directory Domain will let you have the domain’s benefits, such as central management, Group Policies, security and much more.
In this video you will learn: Joining a Client to Domain. The client is Windows 8 and the server is Windows Server 2012.

Also see: How to install and configure Active Directory Domain Services AD DS on Windows Server 2012

source

Windows 10 personal computer on the Raspberry Pi: NComputing roll-outs $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be for sale to firms from the end of this month.

A thin client is a easily portable computer that is purpose-built for remoting into a server (generally cloud or desktop virtualization environments). It depends highly upon one more computer (its server) to meet its computational jobs. This is distinctive from a traditional desktop computer (fat client), which is a PC made to handle these functions independently. The specific roles assumed by the server can vary greatly, from hosting a shared set of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has unveiled a Windows thin client built on the $35, card-scale Raspberry Pi 3 Model B.

The RX300 mini computer gives you entry to an assortment of Windows desktops, including Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to provision a centrally operated Windows desktop to many hundreds of RX300 clients.

NComputing declares its vCAST streaming technology enables full-screen playback of full HD local or on-line video on the clients, without the need for the central servers to get a top GPU. Having said that, membership to this vCast technology is just included for six months time after buying the RX300.

Every single thin client has 4 USB version 2.0 ports, with full USB re-direction and server-side device drivers in order to provide support for a array of peripherals.

The $99 RX300, which is aimed towards educational facilities and small middle enterprises, can be run as a thin client to access a virtual Windows computer or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian OS.

NComputing declares the thin clients are designed to be easy to manage and receive updates from vSpace Pro 10 servers automatically.

Young Song, NComputing chief executive officer, mentioned he chose to base the client around the Raspberry Pi 3 because of board’s cost-effectiveness and transportability.

Each and every RX300 unfolds included with a cost-free twelve months connection license to vSpace Pro 10, with each subsequent year pricing $49 every customer.

NComputing’s vSpace Pro 10 can easily stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or possibly Windows Server. To stream a desktop to different clients, vSpace Pro 10 needs to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the enterprise must also buy the appropriate Microsoft client access licenses.

The NComputing RX300 series will be available in the market worldwide in late February via shops.

The RX300 is not the 1st thin client to be launched on top of the best-selling Raspberry Pi. In 2016 Citrix and ViewSonic presented the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Benefits Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

N-series launch at Citrix Synergy 2012

Mike Pagani, Senior Director of Product Marketing takes us through an introduction to our new N-series Thin Clients for Citrix HDX which deliver 100% of the amazingly rich HDX experience at approximately 1/3 the cost of typical HDX-capable PCs and traditional thin client devices. Powered by our third-generation Numo™ 3 System-on-Chip (SoC), N-series devices support and simplify XenDesktop, XenApp, and VDI-in-a-Box desktop and application virtualization deployments with full HD video while using less than 5 watts of power.

source

Windows 10 personal computer on the Raspberry Pi: NComputing unveils $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be offered to firms from the end of this month.

A thin client is a easily portable computer that is purpose-built for remote access to a server (typically cloud or desktop virtualization environments). It is dependent greatly upon an additional computer (its server) to meet its computational tasks. This is different from a typical desktop computer (fat client), which is a PC made to tackle these functions on it’s own. The specific roles assumed by the server could differ, from hosting a shared set of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has released a Windows OS thin client built on the $35, mastercard-dimension Raspberry Pi 3 Model B.

The RX300 thin client gives access to a variety of Windows desktops, such as Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization program.

The software allows firms to provision a centrally managed Windows desktop to many hundreds of RX300 clients.

NComputing declares its vCAST streaming technology enables full-screen playback of 1080p FHD local or on-line video on the clients, without the necessity for the central servers to use a dedicated GPU. Then again, subscription to this vCast technology is just bundled for half a year after paying for the RX300.

Each and every thin client has 4 USB version 2.0 ports, with full USB redirection and server-side device drivers to give support for a variety of peripherals.

The $99 RX300, which is aimed towards institutions and small middle businesses, can be run as a thin client to get into a virtual Windows desktop or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian Operating-system.

NComputing claims the thin clients are created to be quick to configure and receive updates from vSpace Pro 10 servers on auto-pilot.

Young Song, NComputing CEO, mentioned he chose to base the client on the Raspberry Pi 3 due to the board’s affordable price and flexibility.

Each individual RX300 is provided included with a cost-free twelve months connection license to vSpace Pro 10, with each subsequent year pricing $49 a consumer.

NComputing’s vSpace Pro 10 can easily stream a Windows desktop to an individual client from Windows 7, 8.1 or 10 or maybe Windows Server. To stream a desktop to several clients, vSpace Pro 10 needs to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the enterprise should also buy the correct Microsoft client access licenses.

The NComputing RX300 series will be attainable all over the world in late February thru resellers.

The RX300 isn’t the 1st thin client to be introduced on top of the excellent Raspberry Pi. Not too long ago Citrix and ViewSonic released the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Features Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Workaround for Remote Desktop Expired Certificate Error when Connecting from PC Thin Client

Workaround for Remote Desktop Expired Certificate Error when Connecting from PC Thin Client usually from embedded operating systems like windows ce 5.0 or windows ce 6.0 etc

source

Windows 10 personal computer on the Raspberry Pi: NComputing comes out $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be for sale to firms from the end of this month.

A thin client is a handy PC that is purpose-built for remote entry to a server (usually cloud or desktop virtualization environments). It depends to a great extent on yet another computer (its server) in order to meet its computational functions. This is unlike a normal desktop computer (fat client), which is a PC made to conduct these functions on its own. The specific roles assumed by the server can vary, from hosting a shared set of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has unveiled a Windows OS thin client built around the $35, credit card-scale Raspberry Pi 3 Model B.

The RX300 mini computer allows for access to various Windows desktops, including Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to supply a centrally manipulated Windows desktop to 100s of RX300 clients.

NComputing states its vCAST streaming technology allows for full-screen play-back of 1080p FHD local or web-based video on the clients, without the need for the central servers to get a dedicated GPU. However, subscription to this vCast technology is just included for 6 months after buying the RX300.

Every thin client has four USB version 2.0 ports, with full USB redirection and server-end device drivers to grant support for a selection of add-ons.

The $99 RX300, which is made for educational institutions and small middle enterprises, can be run as a thin client to access a virtual Windows desktop or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian Operating system.

NComputing states the thin clients are made to be easy to set up and receive updates from vSpace Pro 10 servers auto-magically.

Young Song, NComputing chief executive officer, stated he decided to base the client upon the Raspberry Pi 3 due to board’s very low cost and flexibility.

Each RX300 arrives along with a free 12 months connection license to vSpace Pro 10, with each subsequent year pricing $49 every user.

NComputing’s vSpace Pro 10 can easily stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or possibly Windows Server. To stream a desktop to multiple clients, vSpace Pro 10 is required to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the corporation will also need to invest in the correct Microsoft client access licenses.

The NComputing RX300 series will be available in the market worldwide in late February through shops.

The RX300 isn’t the very first thin client to be launched based on the top rated Raspberry Pi. In 2016 Citrix and ViewSonic launched the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Features Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Desktop Virtualization VERDE – Application Layers

http://vbridges.com

One of the challenges of managing desktops in the enterprise is how to distribute and control the applications that are installed on the guests. Virtual Bridges supports the concept of application layering, where virtualized applications or packages are brought to the desktop when the session is started by the user. In this video, we’re going to take a previously packaged application and add it to VERDE so that it is available for distribution to the users of the desktops.

source

Windows 10 desktop computer on the Raspberry Pi: NComputing unveils $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be for sale to firms from the end of this month.

A thin client is a compact personal computer that is purpose-built for remote access to a server (most of the time cloud or desktop virtualization environments). It depends seriously on another computer (its server) in order to satisfy its computational roles. This is distinct from a typical desktop computer (fat client), which is a PC created to handle these tasks on its own. The specific roles assumed by the server could vary, from hosting a shared set of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has announced a Windows thin client built upon the $35, charge card-scale Raspberry Pi 3 Model B.

The RX300 thin client gives you access to an assortment of Windows desktops, including Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to provision a centrally managed Windows desktop to 100s of RX300 clients.

NComputing says its vCAST streaming technology enables full-screen replay of 1080p FHD local or web video on the clients, without the necessity for the central servers to get a dedicated GPU. In spite of this, subscription to this vCast technology is only incorporated for six months after buying the RX300.

Each and every thin client has four USB v 2.0 ports, with full USB re-direction and server-end device drivers to offer you support for a collection of add-ons.

The $99 RX300, which is created for educational facilities and SMEs, can be run as a thin client to access a virtual Windows desktop computer or as a local Raspberry Pi PC, running the Pi’s official Linux-based Raspbian Operating-system.

NComputing states the thin clients are made to be straight forward to manage and receive updates from vSpace Pro 10 servers routinely.

Young Song, NComputing CEO, said he chose to base the client around the Raspberry Pi 3 because of board’s cost-effectiveness and portability.

Each individual RX300 is offered along with a cost-free 12 months connection license to vSpace Pro 10, with each subsequent year charging $49 each consumer.

NComputing’s vSpace Pro 10 can stream a Windows desktop to a single client from Windows 7, 8.1 or 10 or even Windows Server. To stream a desktop to multiple clients, vSpace Pro 10 has to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the firm also has to spend money on the correct Microsoft client access licenses.

The NComputing RX300 series will be on the market across the globe in late February via resellers.

The RX300 is not the 1st thin client to be launched founded on the best-selling Raspberry Pi. Not too long ago Citrix and ViewSonic launched the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Capabilities Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Basic setup for thin client connecting to Microsoft VDI

Basic setup for Axel thin client connecting to Microsoft VDI

source

Windows 10 personal computer on the Raspberry Pi: NComputing rolls out $99 RX300 Computer

Official introduction: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be for sale to firms from the end of this month.

A thin client is a light and portable PC that is purpose-built for remote entry to a server (usually cloud or desktop virtualization environments). It relies greatly on yet another computer (its server) in order to reach its computational roles. This is distinctive from a classic desktop computer (fat client), which is a computer intended to tackle these roles by itself. The specific roles assumed by the server may differ, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has unveiled a Windows OS thin client built around the $35, debit card-scale Raspberry Pi 3 Model B.

The RX300 thin client gives access to quite a few Windows desktops, for example, Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to provide a centrally manipulated Windows desktop to 100s of RX300 clients.

NComputing says its vCAST streaming technology makes it possible for full-screen replay of 1080p FHD local or web-based video on the clients, without needing the central servers to possess a premium graphics processing unit. Then again, membership to this vCast technology is just provided for six months after buying the RX300.

Every thin client has 4 USB version 2.0 ports, with full USB re-direction and server-end device drivers to give support for a range of peripherals.

The $99 RX300, which is directed at schools and small middle businesses, can be run as a thin client to gain access to a virtual Windows computer or as a local Raspberry Pi PC, running the Pi’s official Linux-based Raspbian Operating system.

NComputing states the thin clients are intended to be easy to set up and receive updates from vSpace Pro 10 servers auto-magically.

Young Song, NComputing chief executive officer, stated he opted to base the client around the Raspberry Pi 3 because of board’s value for money and portability.

Every RX300 arrives included with a free one year connection license to vSpace Pro 10, with each subsequent year pricing $49 each user.

NComputing’s vSpace Pro 10 can stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or Windows Server. To stream a desktop to several clients, vSpace Pro 10 should be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the firm also has to buy the proper Microsoft client access licenses.

The NComputing RX300 series will be available all around the world in late February thru resellers.

The RX300 isn’t the 1st thin client to be introduced based on the best-selling Raspberry Pi. Last year Citrix and ViewSonic released the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Benefits Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf