NComputing Network

vedio help to installing NComputing Device

source

Windows 10 personal computer on the Raspberry Pi: NComputing unveils $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be offered to firms from the end of this month.

A thin client is a light and portable computer that is purpose-built for remoting into a server (usually cloud or desktop virtualization environments). It relies intensely upon another computer (its server) to fulfill its computational functions. This is distinct from a typical desktop computer (fat client), which is a computer intended to undertake these jobs without help. The specific roles assumed by the server can differ, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has released a Windows OS thin client built around the $35, bank card-sized Raspberry Pi 3 Model B.

The RX300 tiny computer brings entry to several Windows desktops, for instance, Windows 10, which are streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to offer a centrally controlled Windows desktop to 100s of RX300 clients.

NComputing claims its vCAST streaming technology makes it possible for full-screen video playback of 1080p full HD local or on-line video on the clients, without the necessity for the central servers to have a premium GPU. Yet, membership to this vCast technology is only incorporated for half a year after paying for the RX300.

Every single thin client has four USB version 2.0 ports, with full USB redirection and server-end device drivers to offer you support for a wide range of add-ons.

The $99 RX300, which is made for schools and SMBs, can be run as a thin client to get into a virtual Windows computer or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian OS.

NComputing states the thin clients are built to be effortless to set up and receive updates from vSpace Pro 10 servers routinely.

Young Song, NComputing chief executive officer, claimed he decided to base the client around the Raspberry Pi 3 mainly because of the board’s value for money and mobility.

Each RX300 is available bundled with a cost-free twelve months connection license to vSpace Pro 10, with each subsequent year priced at $49 a user.

NComputing’s vSpace Pro 10 can stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or Windows Server. To stream a desktop to multiple clients, vSpace Pro 10 should be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the firm will also need to buy the correct Microsoft client access licenses.

The NComputing RX300 series will be offered across the globe in late February via shops.

The RX300 isn’t the very first thin client to be launched on top of the best-selling Raspberry Pi. In 2016 Citrix and ViewSonic launched the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Functions Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Réaliser une empreinte de composant – Eagle Pcb

Comment réaliser une empreinte de composant sous Eagle Pcb

Source

Eagle PWB Design With Matt Berggren

pcb-design

Eagle is a household term for all Hackaday regulars. Here’s the chance to find out about coming features, have your ‘how do I do this in Eagle?’ questions resolved, and get your wishlist items heard. Join us on Friday at 12:00 PST for a real-time Hack Chat about the Eagle PWB Design computer software.

Hosting this week’s discourse is Matt Berggren, best known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s acquisition of Eagle last summer, the popular schematic design and PWB layout software falls under his acumen. He’s got a considerable history in designing printed circuit boards -if you could do it in EDA software package he is sure of how -this is definitely an amazing opportunity to get responded the questions that were stumping you.

Really do not skip the Hack Chat! Listed below is a effortless on-line application to assist switch 1/13/17 at 12:00 PST to your localized time.

And here is How to Take Part:

Hack Chat are live community occurrences that occur in the Hackaday.io Hacker Channel. Take a look at that webpage (make sure you are signed in) and seek for the “Join this Project Button” in the top right. After you are part of the Hacker Channel, that button will plunge to “Team Messaging” that takes you to the Hack Chat.

You don’t ought to await Friday, join Hack Chat at any time you love and find what the community is now making reference to.

Join Us Next Week Too for KiCad!
Are you more of a KiCad guy than an Eagle guy? It is advisable to still drop by this week to see if Matt changes your thinking. But filter your appointments next week when Wayne Stambaugh, one of the lead developers of KiCad will appear for a Hack Chat on Friday, 1/20/17.

ncomputing x550 desempeño windows 7

Equipo nComputing x550. Equipo de prueba, instalado en una AMD phenom II x2 550 3.1ghz, 3 gb de ram windows 7 32 bits, office 2007, windows media player. Este funciona correctamente como para una escuela, oficina, puntos de venta. Las limitantes que te da son gráficas, por que no permite correr aplicaciones que requieran muchos gráficos. No he probado con photoshop, o algun software de vectorizacion, pero prometo hacerlo proximamente.
Para más información de ventas, asesoria, y pruebas en la peninsula de yucatan, deja tu comentario.

source

Windows 10 computer on the Raspberry Pi: NComputing launches $99 RX300 Computer

Official introduction: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client is going to be available to firms from the end of this month.

A thin client is a lightweight desktop computer that is purpose-built for remote access to a server (in most situations cloud or desktop virtualization environments). It is dependent intensely upon an additional computer (its server) to meet its computational jobs. This is dissimilar to a conventional desktop computer (fat client), which is a PC built to execute these tasks independently. The specific roles assumed by the server may differ, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has brought out a Windows OS thin client built on the $35, debit card-scale Raspberry Pi 3 Model B.

The RX300 thin client delivers entry to various Windows desktops, which include Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to provision a centrally managed Windows desktop to 100s of RX300 clients.

NComputing promises its vCAST streaming technology permits full-screen video playback of full HD local or web based video on the clients, without the need for the central servers to have a top notch GPU. Nonetheless, registration to this vCast technology is just provided for 6 months after buying the RX300.

Each individual thin client has four USB version 2.0 ports, with full USB redirection and server-end device drivers to offer you support for a assortment of peripheral devices.

The $99 RX300, which is geared towards educational institutions and SMBs, can be run as a thin client to reach a virtual Windows computer or as a local Raspberry Pi Computer, running the Pi’s official Linux-based Raspbian Operating-system.

NComputing says the thin clients are designed to be rather simple to configure and receive updates from vSpace Pro 10 servers automatically.

Young Song, NComputing CEO, said he chose to base the client around the Raspberry Pi 3 due to board’s value for money and portability.

Each and every RX300 arrives along with a free twelve months connection license to vSpace Pro 10, with each subsequent year priced at $49 for every user.

NComputing’s vSpace Pro 10 has the ability to stream a Windows desktop to a single client from Windows 7, 8.1 or 10 or maybe Windows Server. To stream a desktop to various clients, vSpace Pro 10 must be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the firm will also need to put money into the proper Microsoft client access licenses.

The NComputing RX300 series is going to be for sale internationally in late February thru merchants.

The RX300 isn’t the very first thin client to be launched on top of the best-selling Raspberry Pi. During the past year Citrix and ViewSonic introduced the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Functions Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Import Library expert – PCB EAGLE

This Video shows how to Import from Library Expert into EAGLE

Source

Eagle PWB Design With Matt Berggren

pcb-design

Eagle is a house-hold term for just about all Hackaday regulars. Here’s your opportunity to learn about approaching features, have your ‘how do I do this in Eagle?’ questions clarified, and get your wishlist items heard. Join us on Friday at 12:00 PST for a actual time Hack Chat regarding the Eagle PWB Design software package.

Hosting this week’s chat is Matt Berggren, commonly known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s buying of Eagle last summer, the fashionable schematic design and PWB layout software falls under his purview. He has got a large track record in designing printed circuit boards -if you can possibly do it in EDA software he knows how -this is really a superb chance to get resolved the important questions which have been stumping you.

Don’t miss this Hack Chat! Here’s a convenient online application that will help transform 1/13/17 at 12:00 PST to your native time.

Here’s The way to Take Part In:

Hack Chat are live community activities that happen in the Hackaday.io Hacker Channel. Check-out that web page (you should always be signed in) and hunt for the “Join this Project Button” in the top right. When you are part of the Hacker Channel, that button will switch to “Team Messaging” which takes you to the Hack Chat.

You don’t have to await Friday, join Hack Chat at any time you want and find what the community is speaking about.

Come Along Next Week Way too for KiCad!
Are you a greater portion of a KiCad person than an Eagle person? You have to still drop by this week to see if Matt changes your thinking. But get rid of your appointments next week when Wayne Stambaugh, among the list of well-known developers of KiCad will come along for a Hack Chat on Friday, 1/20/17.

Instalação do Ncomputing Vspace X350 X550 dicas testes

Mais um serviço técnico prestado por nossa empresa, trata-se da instalação,configuração e suporte técnico para os sistemas da Ncomputing no Brasil, os terminais virtuais ótimos para escolas,lan houses e outras empresas que buscam praticidade e economia.

Aqui fazemos os testes dos Modelos X350 e X550 instalados no Windows, mas o sistema também aceita ser instalado no LINUX. Contrate nosso serviço, compre os kits no mercado e adquira a instalação e suporte técnico conosco, atendemos em todo Brasil!

LEIA MAIS AQUI:
http://www.esijmjg.com.br/2016/01/ncomputing-x350-x550-vspace-instalacao.html

Não vendemos produtos, prestamos serviços com técnica e inteligência.

(0X11) 2308-4673 www.esijmjg.com.br ou www.esijmjg.com

source

Windows 10 PC on the Raspberry Pi: NComputing roll-outs $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client is going to be available to firms from the end of this month.

A thin client is a light and portable desktop PC that is purpose-built for remoting into a server (in most cases cloud or desktop virtualization environments). It depends greatly on yet another computer (its server) in order to meet its computational functions. This is distinct from a typical desktop computer (fat client), which is a PC meant to take on these functions on it’s own. The specific roles assumed by the server can vary greatly, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has introduced a Windows thin client built around the $35, charge card-sized Raspberry Pi 3 Model B.

The RX300 thin client brings access to quite a few Windows desktops, for example, Windows 10, which are streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software.

The software allows firms to offer a centrally operated Windows desktop to hundreds of RX300 clients.

NComputing promises its vCAST streaming technology allows for full-screen play-back of 1080p FHD local or on-line video on the clients, without the demand for the central servers to possess a superior GPU. In spite of this, membership to this vCast technology is only provided for half a year after buying the RX300.

Every single thin client has four USB version 2.0 ports, with full USB redirection and server-end device drivers to provide support for a selection of add-ons.

The $99 RX300, which is designed for schools and small middle businesses, can be run as a thin client to get into a virtual Windows desktop or as a local Raspberry Pi PC, running the Pi’s official Linux-based Raspbian Operating system.

NComputing states the thin clients are intended to be straightforward to set up and receive updates from vSpace Pro 10 servers routinely.

Young Song, NComputing chief executive officer, claimed he chose to base the client on the Raspberry Pi 3 considering the board’s affordability and portability.

Each and every RX300 arrives bundled with a cost-free twelve months connection license to vSpace Pro 10, with each subsequent year charging $49 per user.

NComputing’s vSpace Pro 10 can easily stream a Windows desktop to a single client from Windows 7, 8.1 or 10 or possibly Windows Server. To stream a desktop to various clients, vSpace Pro 10 needs to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the corporation also has to pay money for the appropriate Microsoft client access licenses.

The NComputing RX300 series is going to be available all over the world in late February through resellers.

The RX300 is not the 1st thin client to be introduced based on the excellent Raspberry Pi. In 2016 Citrix and ViewSonic presented the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Functions Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Tutorial Desain PCB dengan Cadsoft Eagle – FansElectronics

Demo pembuatan desain PCB dan SKematik menggunakan Aplikasi Cadsoft Eegle dengan mudah…
– Kunjungi : http://www.fans-electronics.com/
– Join Forum diskusi Facebook : https://www.facebook.com/groups/FansElectronics/

Source

Eagle PWB Design With Matt Berggren

pcb-design

Eagle is a house-hold reputation for just about all Hackaday regulars. This is the chance to have an understanding of approaching features, make your ‘how do I do this in Eagle?’ questions addressed, and get your wishlist items heard. Come along on Friday at 12:00 PST for a real-time Hack Chat regarding the Eagle PWB Design software program.

Hosting this week’s conversation is Matt Berggren, best known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s purchase of Eagle last summer, the well liked schematic design and PWB layout software falls under his purview. He has got a wide qualifications in designing printed circuit boards -if you could do it in EDA software program he is sure of how -this is an excellent chance to get resolved the important questions that were stumping you.

Don’t miss out on the Hack Chat! This is a very useful on-line application to help convert 1/13/17 at 12:00 PST to your local area time.

And here is The right way to Participate:

Hack Chat are live community events that occur in the Hackaday.io Hacker Channel. Explore that page (remember to be signed in) and check out the “Join this Project Button” in the upper right. When you are a member of the Hacker Channel, that button will change to “Team Messaging” which takes you to the Hack Chat.

You don not ought to expect Friday, join Hack Chat any time you like and find what the community currently is debating.

Come Along Next Week As well for KiCad!
Are you more of a KiCad person than an Eagle person? You should still drop by this week to see if Matt changes your thinking. But eliminate your calendar next week when Wayne Stambaugh, among the list of famed developers of KiCad will join us for a Hack Chat on Friday, 1/20/17.

How to Upgrade Ncomputing vSpace Server 7.1 to 8.3

How to Upgrade Ncomputing vSpace Server 7.1 to 8.3 and For more details visit http://www.totalitech.com/

source

Windows 10 personal computer on the Raspberry Pi: NComputing releases $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client will be for sale to firms from the end of this month.

A thin client is a handy personal computer that is purpose-built for remote access to a server (generally cloud or desktop virtualization environments). It relies strongly on an additional computer (its server) in order to reach its computational jobs. This is different from a standard desktop computer (fat client), which is a computer built to undertake these functions on it’s own. The specific roles assumed by the server can vary greatly, from hosting a shared group of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has launched a Windows OS thin client built around the $35, card-sized Raspberry Pi 3 Model B.

The RX300 tiny computer presents entry to quite a few Windows desktops, for example, Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization program.

The software allows firms to provide a centrally managed Windows desktop to 100s of RX300 clients.

NComputing says its vCAST streaming technology allows full-screen play-back of full HD local or on-line video on the clients, without the necessity for the central servers to possess a dedicated graphics processing unit. Nevertheless, subscription to this vCast technology is only provided for 6 months after paying for the RX300.

Every single thin client has four USB version 2.0 ports, with full USB re-direction and server-end device drivers to render support for a range of peripheral devices.

The $99 RX300, which is intended for schools and small middle businesses, can be run as a thin client to access a virtual Windows desktop or as a local Raspberry Pi PC, running the Pi’s official Linux-based Raspbian Operating system.

NComputing says the thin clients are built to be quick to set up and receive updates from vSpace Pro 10 servers robotically.

Young Song, NComputing CEO, explained he opted to base the client on the Raspberry Pi 3 considering the board’s affordability and flexibility.

Each individual RX300 is offered included with a free 12 months connection license to vSpace Pro 10, with each subsequent year charging $49 each user.

NComputing’s vSpace Pro 10 is able to stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or maybe Windows Server. To stream a desktop to different clients, vSpace Pro 10 ought to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the firm will also need to put money into the appropriate Microsoft client access licenses.

The NComputing RX300 series will be offered across the globe in late February via shops.

The RX300 isn’t the first thin client to be introduced founded on the top rated Raspberry Pi. In 2016 Citrix and ViewSonic launched the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Benefits Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

PCB Eagle 4 HeTPro: DRC y Gerber

Revisar errores con DRC y generar gerbers

TUTORIAL 3: https://www.youtube.com/watch?v=isDzLEy4nq0

HeTPro
www.hetpro.com.mx
https://hetpro-store.com/TUTORIALES/
contacto@hetpro.com.mx

Source

Eagle PCB Design With Matt Berggren

pcb-design

Eagle is a household reputation for more or less all Hackaday regulars. Right here is the time to find out more about impending features, have your ‘how do I do this in Eagle?’ questions addressed, and get your wishlist items heard. Come along on Friday at 12:00 PST for a realtime Hack Chat regarding the Eagle PCB Design computer software.

Hosting this week’s talk is Matt Berggren, best known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s purchase of Eagle last summer, the well-liked schematic design and PCB layout software falls under his purview. He has a thorough qualifications in designing printed circuit boards -if you can do it in EDA software package he knows how -this is an amazing chance to get addressed the questions that were stumping you.

Don’t skip this Hack Chat! Here’s a effortless web-based gadget to assist alter 1/13/17 at 12:00 PST to your local time.

Here’s How one can Engage:

Hack Chat are live community occurrences that happen in the Hackaday.io Hacker Channel. Look at that webpage (remember to be logged in) and search for the “Join this Project Button” in the top right. When you’re part of the Hacker Channel, that button will switch to “Team Messaging” that takes you to the Hack Chat.

You don’t have to await Friday, join Hack Chat at any time that suits you and look at what the community is currently preaching about.

Join Us Next Week Too for KiCad!
Are you more of a KiCad person than an Eagle person? You ought to still drop by this week to find out if Matt changes your opinions. But erase your calendar next week when Wayne Stambaugh, among the list of well-known developers of KiCad will show up for a Hack Chat on Friday, 1/20/17.

thin client / ncomputing networking tutorials part – 2

This video tutorial will explain the Ethernet based networking diagram of thin client / ncomputing . it also explain the advantages & disadvantages of ethernet based thin cilent . comparison of Ethernet based thin client & pci card based thin client / ncomputing

source

Windows 10 PC on the Raspberry Pi: NComputing comes out $99 RX300 Computer

Official intro: https://www.ncomputing.com/en/products/rxseries

The RX300 thin client is going to be available to firms from the end of this month.

A thin client is a lightweight personal computer that is purpose-built for remoting into a server (typically cloud or desktop virtualization environments). It is dependent greatly upon a second computer (its server) in order to satisfy its computational jobs. This is dissimilar to a conventional desktop PC (fat client), which is a PC which is designed to handle these jobs on it’s own. The specific roles assumed by the server could differ, from hosting a shared set of virtualized applications, a shared desktop stack or virtual desktop, to data processing and file storage on the client’s or user’s behalf.

NComputing has presented a Windows OS thin client built around the $35, debit card-scale Raspberry Pi 3 Model B.

The RX300 thin client brings use of various Windows desktops, for instance, Windows 10, which can be streamed from a central machine by NComputing’s vSpace Pro 10 desktop virtualization software program.

The software allows firms to provision a centrally managed Windows desktop to many hundreds of RX300 clients.

NComputing says its vCAST streaming technology permits full-screen playback of full HD local or online video on the clients, without the need for the central servers to own a superior graphics processing unit. On the other hand, registration to this vCast technology is only provided for 6 months after buying the RX300.

Each and every thin client has four USB version 2.0 ports, with full USB redirection and server-end device drivers to supply support for a wide range of peripherals.

The $99 RX300, which is created for schools and small middle enterprises, can be run as a thin client to access a virtual Windows desktop computer or as a local Raspberry Pi PC, running the Pi’s official Linux-based Raspbian Operating-system.

NComputing claims the thin clients are built to be rather simple to set up and receive updates from vSpace Pro 10 servers routinely.

Young Song, NComputing chief executive officer, said he decided to base the client on the Raspberry Pi 3 mainly because of the board’s value for money and portability.

Each and every RX300 is provided along with a cost-free one year connection license to vSpace Pro 10, with each subsequent year pricing $49 a customer.

NComputing’s vSpace Pro 10 can stream a Windows desktop to one single client from Windows 7, 8.1 or 10 or Windows Server. To stream a desktop to several clients, vSpace Pro 10 ought to be running on Windows Server 2016, Windows Server 2012 R2 U1, Windows Server 2012, Windows Server 2008 R2 SP1, Windows Multipoint Server 2011 or Windows Multipoint Server 2012-the firm will also need to buy the correct Microsoft client access licenses.

The NComputing RX300 series is going to be obtainable all over the world in late February thru resellers.

The RX300 isn’t the first thin client to be released based on the best-selling Raspberry Pi. In 2016 Citrix and ViewSonic unveiled the $119.99 SC-T25 Raspberry Pi 3 Thin Client.

RX300 Capabilities Datasheet

ncomputing-rx300-features-hardware-components-datasheet

source: https://ncomputing.box.com/shared/static/rj90aks7gk03nobowns86skj5o8omtig.pdf

Tutorial Eagle PCB – Thermometer LCD

Ini adalah rangkaian thermometer LCD yang sensornya merupakan sensor analog dan saya berikan konektor terminal kabel sebagai penghubung.
Download dan penjelasan di : http://duwiarsana.com

Source

Eagle PWB Design With Matt Berggren

pcb-design

Eagle is a household good reputation for more or less all Hackaday regulars. Here is the time to be familiar with impending features, have your ‘how do I do this in Eagle?’ questions solved, and get your wishlist items heard. Come along on Friday at 12:00 PST for a live Hack Chat on the subject of the Eagle PWB Design program.

Hosting this week’s conversation is Matt Berggren, best known on Hackaday.io as technolomaniac. Matt is the Director of Autodesk Circuits and with Autodesk’s purchase of Eagle last summer, the well liked schematic design and PWB layout software falls under his purview. He has a thorough qualifications in designing printed circuit boards -if you possible could do it in EDA software package he knows how -this is a very good opportunity to get answered the important questions that were stumping you.

Don’t skip out this Hack Chat! The following is a invaluable internet based application for helping alter 1/13/17 at 12:00 PST to your local area time.

Here’s How you can Engage:

Hack Chat are live community events that happen in the Hackaday.io Hacker Channel. Check out that page (make sure you are logged in) and look for the “Join this Project Button” in the upper right. After you are a member of the Hacker Channel, that button will change to “Team Messaging” which walks you to the Hack Chat.

You don’t have to watch for Friday, join Hack Chat whenever you prefer and see what the community is now going over.

Come Along Next Week Also for KiCad!
Are you a greater portion of a KiCad guy than an Eagle guy? You need to still stop by this week to determine if Matt changes your opinions. But block out your appointments next week when Wayne Stambaugh, among the list of lead developers of KiCad will arise for a Hack Chat on Friday, 1/20/17.